To Sales Factory Price Vehicle Traveling Data Car Accessory Recorder

Features:

1.Tachograph+TPMS combo products

2.1/3",500mega pixels   CMOShigh sensitivity & low illumination sensor

3.Sony Camera,170° super wide angle,F1.8 aperture

4. 4.3 inch  480*272 large screen

5.Maximum support:2560×1440@30frame/second(1440P)

6.Snapshot in video

7.Custom the starting logo for your car brand

8.Axis ravity sensor:G-sensor,support for emergency / crash locking video

9.Support to the mobile phone APP(WIFI matching);GPS module matching

System Parameter:

1.Photosensitive element:1/3",500 mega pixels   CMOS high sensitivity & low illumination
2.Camera resolution: 16M,14M,12M,8M,5M,2M,1.3M,VGA JPEG (optional)
3.Camera shooting:2560*1440@30frame/second(1440P),Full HD 1920*1080@60frame/second(1080P),Full HD 1920*1080@30frame/second(1080P),HD 1280*720@60frame/second(720P),HD 1280*720@30frame/second(720P),640X480@30frame/second(VGA)(optional)
4.Video format:H.264, AVI, MOV,and other formats, audio and video synchronization
5.Focus range: 1.5m- unlimited
6.Visual angle: 90 degrees -170 degrees can be selected (according to the specifications of the lens )
7.Storage: built-in TF card, support 8G~128G)
8.LCD display screen: 4.3 inch high-definition screen, resolution is 480*272
9.HDMI interface:have
10.GPS module :support
11.WIFI module:support
12.Data interface:mini USB 2.0
13.Charge type:support USB charge,5V power charge
14.Operation voltage:5V±0.5/410mA
15.Charging time:2~3h(5V/1A power)

1.How to customize the plastic mold and plastic products?

2.How to try the mold after the mold?

Under normal circumstances, We will make 5-20 qualified products in our injection molding department (the actual number of samples is decided by products), and then send to the guest for checking sample. If the guest is to specify the volume of mass production or other trial mode, it is necessary to declare and negotiate in advance.

3. How to follow-up the service of the mold?

Mold is confirmed OK, guests can choose to stay the mold in our factory production. In the production process, as long as it is not because of product design and change the mold, all of the mold maintenance costs would be borne by our factory. We guarantee not to increase the extra expenses for the guests within the normal working life of mold; if the guest requests the mold tranfer to other factory, due to reasons of other plant operation factors, We no longer provide follow-up maintenance services