Professional Spray Foam Application Gun

Professional Spray Foam Application Gun

1: before use: the foam tank. Up and down shake up to 1 minute.

2: the tank screwing in adapter (not too tight!)

3: ejector start working, press machine, let the bubble flow for 10 seconds.

Fill the bubbles with extension tube. Residual air out.

4: to fix the needle in the nozzle.

5: the new flow control device available with cans of syringes should keep erect.

6: bubble output with the machine to adjust and control flow adjustment screw, if the adjustment screws tighten,

Injector machine be locked do not loosen the adjustment screw by turning more than three times.

7: replacing cans new cans, trying to shake off empty cans.

Quickly (in minutes) with the new structure of foam tank.

8: in tank must quickly is to prevent hair bubble hardening in the adapter.

9: replace let hardening bubble agglomeration needle when necessary.

10: when cleaning foam gun, quickly unload container. Detergent inverted spin to

Foam gun adapter pulled the trigger for a thorough cleaning.

11: foam gun mouth foam before hardening residue removed using this pie or analogues.