Electric Scooter/Motorcycle Battery YB6L-B High Performance Dry-charged Storage Battery

Liyang Motorcycle Battery YB6L-B high performance dry-charged storage battery

1. Installation Instructions:

    1)The battery must be installed by professionals.

    2) The battery can not be used in confined or high temperature environment (recommended  cycle temperature 5 to 35 ° C).

    3) Installation handling battery should be uniform stress, by force at battery part of the shell, and to avoid damage to the pole.

    4) When a few battery used in parallel, the battery identification "+" and "-"  polarity      sequence can not be less than the distance between the battery at least 15mm.

    5) In the process of battery connection , please wear protective gloves, use a torque wrench metal tools, please metal tools insulated packaging, absolutely avoid contact with metal tools to the battery positive and negative terminals.

   6) If you need the battery used in parallel, generally not to exceed three groups (one) in parallel. 

   7) Before the external device is connected, so that the device is in the OFF state, and then   the   battery (group) in the positive electrode of the positive electrode connecting device, and the negative terminal of the battery (group) of the negative electrode connecting device,and fastening the cable.

(2) MattersNeedAttention:

1) Non professionals can not open the battery, in order to avoid danger, such as

       inadve rtent rupture of the battery case, exposure to sulfuric acid, rinse with plenty   of water, if necessary, call a physician.

2) Pay attention to the connection between the battery is correct or not as use more     than one battery,to avoid short circuit.

3)Should be avoided strong vibration or mechanical damage in the process of using .

4)Using upper and lower with vent battery container to heat.

5) Please avoid let the the battery awashed by rain and do not put the batter into the water.

6) Please try to wring a wet rag when cleaning the battery, do not use a dry cloth or duster and the chemical cleaning agent clean the battery.

(3) Classified Introduction:

1)12N ordinary battery --Opening battery

lProduct materials,manufacturing processes mature,inexpensive

lUsing PP material,more strongerSeismic resistance

lRelatively long shelf life,can be stored for one year,to add electrolyte when using

lResistance to overcharge,over discharge ,high performance

lFacilitate the shipment,no acid leakage during transport

2)YB High Performance Lead Acid Storage Battery

lProduct materials,manufacturing processes mature,inexpensive

lUsing PP material,more strongerSeismic resistance

lRelatively long shelf life,can be stored for one year,to add electrolyte when using

lResistance to overcharge,over discharge ,high performance

lFacilitate the shipment,no acid leakage during transport

3)YTX Half- free Maintenance Battery

lSealing structure,maintenance- free use

lPlate lead calcium alloy,lead purity0.99996

lLarge capacity,low self discharge

lExcellent high rate discharge performance and deep cycling capability

lExcellent start up performance is not available in ordinary batteries

lRelatively long shelf life,can be stored for one year,to add electrolyte when using

 4)Maintenance-free battery

lSealing structure,installation and charging without acid,maintenance -free use

lPlate lead calcium alloy,lead purity0.99996

lLarge capacity,low self discharge

lExcellent high rate discharge performance

lExcellent start up performance is not available in ordinary batteries

lUsually to add power after 3 to 6 months’ storage