Contact Platform Support
Help Center
Related Products
-
Cnc Cutter Tools Long Shank Solid Carbide End MillNegotiableMOQ: 200 Pieces -
Top Quality 55 HRC Long Shank Carbide Taper Boring End Mill Cutting ToolsNegotiableMOQ: 200 Pieces
-
Cnc Machine Cutting ToolsNegotiableMOQ: 200 Pieces
-
55 HRC Long Shank Carbide Taper End Mill 10*100mmNegotiableMOQ: 200 Pieces
-
CNC Quality Carbide Cutting ToolNegotiableMOQ: 200 Pieces
Specifications
quick working carbide cutting tool*true sub-micron grain tungsten carbide alloy
*HIP sintered and CNC product
*we are factor
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The end mill’s three flutes provide better chip-carrying capacity than four flutes and a finer finish than two. They efficiently remove excess material from the cutting area and provide a third cutting edge to create an improved finish that may eliminate the need for a second finishing cut in some applications. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.
The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
| Diameter(mm) | Length(mm) | Diameter(mm) | Length(mm) |
| 3 | 50 | 3 | 100 |
| 4 | 50 | 4 | 100 |
| 5 | 50 | 5 | 100 |
| 6 | 50 | 6 | 100 |
| 8 | 60 | 8 | 100 |
| 10 | 75 | 10 | 100 |
| 12 | 75 | 12 | 100 |
| 14 | 100 | 6 | 150 |
| 16 | 100 | 8 | 150 |
| 18 | 100 | 10 | 150 |
| 20 | 100 | 12 | 150 |
| 3 | 75 | 14 | 150 |
| 4 | 75 | 16 | 150 |
| 5 | 75 | 18 | 150 |
| 6 | 75 | 20 | 150 |
| 8 | 75 |
Send Inquiry to This Supplier
You May Also Like
-
Angle Grinder Universal Woodworking Tools Starlock SawbladesNegotiableMOQ: 20 Pieces
-
Adjustable Countersink Drilling Bit SetUS$ 1 - 30MOQ: 3000 Sets
-
Tungsten Carbide Inserts to SpecificationUS$ 1 - 1.5MOQ: 100 Pieces
-
BladesUS$ 2 - 2.5MOQ: 5 Pieces
-
Masonry Router Bits For WoodUS$ 1 - 4.8MOQ: 100 Pieces
-
NozzleUS$ 12 - 50MOQ: 20 Pieces
-
Modelling Ball Tools Double Sided Bone Carving Tools 8 Different Sizes IncrementsUS$ 1 - 100MOQ: 100 Pieces
-
Item No.: STA4252 Cutter&BladeUS$ 1.5 - 1.55MOQ: 2000 Sets
-
Non Sparking Tools,U-type Bronze Alloy Shackle,power Tools,ISO9001,UKASUS$ 2.3 - 45MOQ: 1 Piece
-
Brush Cutter, Chainsaw Spark PlugsUS$ 0.05 - 0.5MOQ: 5000 Pieces
