bar push mower

 bar push mower technical date:

About Cutting width 90/100/120 of lawn mower

1.When you use grass cutter first times, Please you must read operation and Maintenance Manual.

2.You must put on a pair of strong shoes, when you cut grass. Please don’t barefoot and have hole of shoes.

Starting the machine, you must check screw that was installed on cutter blade and engine. Then you should check the engine needs oil or not, which don’t higher than strand mark. Last, Please check the gasoline is enough or not.

3.When engine is running or hot, please don’t add oil in the room. No smoking when you add oil.

4.When you cut grass, please clean up the branch, stone wire, iron wire on grass area, and notice some dangerous place such as hole and tree stool and so on.

5.Please dont adjust the wheel height, when engine is running. If you want to adjust it, you must stop the machine working and make sure the cutter blade is standstill, then adjust it on the level.

6.Different speed fit different grass. When the engine is high speed that fit high of grass, otherwise it is young grass. Please using a suitable speed to push the grass cutter.

7.When you cut the grass on the slant face, frist, please know using slope of grass cutter. Don’t cut the grass on biggest slant face or on the up and down place. Please pay close attention to the change direction.

8.When the machine bump into some sudries, please stoping work ,and taking wire apart plug, in order to the grass cutter don’t have any damage.

9.When the grass cutter pass through breakstone of footwalk and roadway,it have to be put out the engine and pass it.

10.When you use the grass cutter, please check the blade.If you find the blade have abrased ,please rechange the blade. You go on use this blade,Maybe it hurt perople.