Contact Platform Support
Help CenterTile Leveling System, Tile Leveling Spacer, Tile Wedge
Related Products
-
Tile Leveling System, Tile Lippage SystemUS$ 1 - 10MOQ: 1000 Bags -
Adhesive Mosaic Mesh, Beava Mosaic MeshUS$ 0.1 - 1MOQ: 10000 Pieces
-
Silicone Remover and FinisherUS$ 0.1 - 5MOQ: 3000 Sets
-
Adhesive Mosaic Spacer, Mosaic Sheet, Adhesive Mosaic Mesh.NegotiableMOQ: 1000 Barrels
-
Professioanl Magnetic Paint Brush Holder, Magnetic Clip.US$ 0.1 - 1MOQ: 1200 Pieces
Specifications
THe best tile leveling systemwe can offer you many different model and type of tile leveling system. diy type , trade type.
tile leveling system
A correct setting requires the perfect levelling of the tiles.
• Very often it is hard to properly set flexible and low thickness tiles as well as big sized and heavy tiles because of the uneven floor foundation.
• As a result, tiles which seemed perfectly levelled while installing them, once the adhesive set, they show differences in level that compromise the aesthetics.
• This can be avoided thanks to the levelling spacers which preserve the perfect levelling of the tiles and, also, they speed up the setting.
• So, the levelling spacers make the setting easy, fast and the tiles are perfectly levelled.
• Minimum required joint: 1.5 mm (1/16"). Tile thickness: minimum 3 mm (1/8"), maximum 20 mm (3/4").
• Both the positioning and the removal of the levelling spacers are easy and quick.
HOW TO USE: How to set the support:
1. After having spread the adhesive, insert the support underneath the tiles and along the 4 sides.
2. According with tiles size, set one or more supports on every side of the tile.
3. Set the tile and beat it with a rubber mallet.
How to insert the wedge:
1. Insert the wedge in the support slot paying attention not to pass the breakpoint.
2. To facilitate this operation, the use of the special traction-adjustable-pliers is recommended.
How to remove the support:
Once the adhesive is set, the protruding part of the support, has to be removed by separating it from the base.
This can be done thanks to the traction-adjustable-pliers, with a rubber mallet or even with feet.
Beat parallel to the joint.
Send Inquiry to This Supplier
You May Also Like
-
1.34CBM Standard GP BUCKET Fit for CAT323 Excavator OEM Quality Excavator Digging Bucket GP BucketsUS$ 1100 - 1300MOQ: 1 Piece
-
16232128S 16232183C 16232134Z 16232135A 16232136B 16232137C 15049010V 16232145L 16232146MNegotiableMOQ: 1 Dozen
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
W010251010 Diesel Fuel Filter Element 13022658 Filter Assembly | SEM 636B Construction Machinery PartsUS$ 20 - 22MOQ: 1 Unit
-
4WRPEH Rexroth Proportional Directional Valve R901382318 4WRPEH6C4B12L-3X/M/24A1US$ 1120 - 1250MOQ: 1 Piece
-
Excavator Hydraulic Pump With SAE J744 Standard Compliant for Global CompatibilityNegotiableMOQ: 500 Pieces
-
For Volvo Penta Fuel Filter 20998367 (7420514654 – 20998367)NegotiableMOQ: 1 Piece
-
12 Ton Tilting Hydraulic Quick Hitch Coupler for Excavator High Strength Tilt Quick Coupler AttachmentUS$ 1500 - 2000MOQ: 1 Piece
-
Supply Excavator Flameout Solenoid Valve 5I-7518NegotiableMOQ: 1 Foot
-
Excavator Bucket Bulldozer Blades Overlay Sections Weld Overlay Wear PlateUS$ 399.69 - 399.69MOQ: 1 Square Meter
