Krupp HM901 hydraulic rock breaker chisel

KRUPP  hydraulic rock breaker chisel

We are specializing in manufacturing the hydraulic breaker and hydraulic breaker spare parts, such as hydraulic breaker chisel, hydraulic breaker piston, hydraulic breaker front head & back head, hydraulic breaker through bolt & side bolt, hydraulic breaker chisel pin, stop pin, outer bush, (lower bush, front bush), inner bush, (upper bush, thrust bush),   hydraulic cylinder and so on. We have good reputation by our high quality products, competitive price and adequate service at home and abroad for long years.

1)Huamaoji rock breaker flat chisel advantage:

 1. high density

 2. good toughness

 3. strong wear-resistance

 4. long service-life

 5. low breakage-rate

 2)Function of  rock breaker flat chisel:

Smash the rocks by impacting power made by strike piston, and protect the hydraulic breaker to avoid the breakage caused by excessive radial force, In other words, if the work encountered excessive radial force, steel chisel in the hydraulic breaker will break before the fracture of the breaker, thereby to protect the hydraulic breaker.

3)Selection of the appropriate rock breaker flat chisel :

 Hydraulic breaker wedge chisels are widely used in the Hydraulic breaker. Hydraulic breaker wedge chisels are more wear-resistant, are suitable to break the heavy reinforced concrete and sedimentary rocks and the rock cracks of high hardness rocks.

Hydraulic breaker cone chisel can provide a very marvelous penetration. No reinforced or slightly reinforced concrete, sedimentary rock, and high hardness, seamy rock and so on.

 Hydraulic breaker flat chisel can not smash the object by penetrating and hacking. commonly used for crushing hard, brittle objects, such as flint, and igneous and metamorphic rocks and so on.

4) rock breaker flat chisel quanlity guanrantee standard: 

You can obtain compensation if subject to warranty conditions:

1.Full compension if fracture takes place wear 50mm below from the tip of the steel chisel.

2.50% compensation if the fracture occurrs wear 100mm below from the tip of the steel chisel.

3.No compensation if the fracture occurrs wear 200mm below from the tip of the steel chisel.

The steel chisel is designed to be broken in order to ensure over-bending does not affect the drill hammer When some sort of external force reaches a certain degree. 

5) rock breaker flat chisel show:

6) rock breaker flat chisel production technology and manufactuing process:

 Raw  material---forging---turney---heatment---ultrasonic flaw detection---hardness test---product packing

7)We can supply the following models of rock breaker flat chisel  : 

For more information please feel free to contact us ,and your specific enquiry will forward without delay.