Contact Platform Support
Help CenterHydraulic Deep Drawing Press Machine
Related Products
Specifications:
Product line solution according to your requirements PLC/TPC/Rexroth Hydraulic valve system/Siemens Motor 7*24 remote service1. It is suitable for the press fitting and stretch forming of metal and plastic products as well as the movements of coining and overprinting.2. It mainly applies to the fields of machine tool, engineering machinery, bearings, washing machine, automobile parts, motor components and powder metallurgy.3. It is suitable for the molding of plastic products, such as DMC and BMC.4. The machine, with a high degree of automatization, is particularly suitable for the mass production of parts. And it can be used as assembly line with several such equipments.
Description:
1. Y27 Series Frame-type Hydraulic Press is a kind of multifunctional precision machine which has high speed.
2. Optimized design, the frame is entirely welded with steel plates, and treated to relive stress by tempering for high precision.
3. Cartridge valve equipped for hydraulic control system, reliable, durable and less hydraulic shock, shorter connection pipeline and fewer release points.
4. Centralized button control system, with adjustment, hand and semi-auto operation modes at operator’s choice (set-stroke single and set pressure single).
5. Four-angle and eight-side guide rail in high precision and with strong capacity against deflection, concentrated lubrication.
6. New type of oil cylinder sealing components marked by high reliability and long service life.
7. Sliding blocks operating in high speed, ensuring high efficiency.
8. The slide operating pressure, no-load quick travel and low-speed movement can be adjusted according to technological requirements.
9. Hydraulic cushion is fitted beneath the worktable; adequate knockout hole and hydraulic cushion are prepared on the plate of worktable with the operating modes including drawing, ejection and no ejection.
10. The working speed of this equipment is 3 to 4 times faster than that of Y41. It employs eight-side guide device and ejecting device, which can automatically eject workpieces with accurate guiding and fast speed.
11. The drawing device can be added to this equipment in order to change moulds easily. But the stretching of large metal parts needs to add hydraulic cushion to this equipment.
Main parameters:
| 11801 | 11802 | 11802-1 | 11803 | 11803-1 | 11805 | 11806 | |||
| ltem | Unit | YAN28-63/100 | YAN28-100/150 | YAN28-150/200 | YAN28-200/300 | YAN28-220/315 | YAN28-315/400 | YAN28-400/600 | |
| Nominal Forec | kN | 1000 | 1500 | 2000 | 3000 | 3150 | 4000 | 6000 | |
| Drawing Force | kN | 630 | 1000 | 150 | 2000 | 2200 | 3150 | 4000 | |
| Knock out Force | kN | 190 | 190 | 400 | 400 | 400 | 800 | 630 | |
| Blank-holder Force | kN | 300 | 500 | 630 | 800 | 1000 | 1000 | 2000 | |
| ure of liquid | MPa | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
| Stroke of drawing slide | mm | 600 | 600 | 700 | 800 | 800 | 800 | 800 | |
| Stroke of Bland-holder slide | mm | 250 | 250 | 250 | 400 | 350 | 400 | 720 | |
| Stroke of knock out cylider | mm | 200 | 250 | 250 | 350 | 350 | - | 400 | |
| Daylight of drawing slide | mm | 1000 | 1200 | 1300 | 1400 | 1560 | 1500 | 2190 | |
| Daylight of Blank holder slide | mm | 600 | 750 | 900 | 720 | 820 | 1000 | 1300 | |
| Table area | mm² | 720×580 | 800×800 | 1000×900 | 980×900 | 1120×1120 | 1360×1200 | 1250×1250 | |
| Main Ram | Rapid down | mm/s | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Slow down | mm/s | 20 | 20 | 20 | 20 | 20 | 20 | 16 | |
| Pressing | mm/s | 10~20 | 10~20 | 10~20 | 10~20 | 10~20 | 10 | 10~16 | |
| Return | mm/s | 100 | 100 | 100 | 135 | 100 | 100 | 100 | |
| Drawing Slide | Knock-out | mm/s | 95 | 95 | 60 | 60 | 90 | 90 | 100 |
| Return | mm/s | 220 | 220 | 180 | 180 | 200 | 200 | 200 | |
| Overall dimensions of machine | L-R | mm | 2500 | 2300 | 3800 | 3800 | 3800 | 4500 | 4300 |
| F-B | mm | 1500 | 900 | 1800 | 1800 | 1800 | 2800 | 2315 | |
| Height above floor | mm | 3200 | 3600 | 4400 | 4600 | 4400 | 4600 | 5240 | |
| Total power | kW | 11 | 15 | 22 | 37 | 37 | 37 | 37 | |
| Total weight | kg | 6000 | 8000 | 10000 | 13000 | 15000 | 17000 | 41000 | |
| Old model | YQ28-63/100 | YQ28-100/150 | YQ28-150/200 | YQ28-200/300 | YQ28-220/315 | YQ28-315/400 | YQ28-400/600 | ||
Send Inquiry to This Supplier
You May Also Like
-
Q35Y-25 Hydraulic Combined Punching Machine Iron WorkerNegotiableMOQ: 1
-
Auto Technical Parameters With Supporting Audio Output Function Motorcycle MP3US$ 10 - 45MOQ: 500 Pieces
-
Hydraulic Punching Machine for Aluminium Window MakingUS$ 800 - 2,000MOQ: 1 Set
-
High Performance Hydraulic One-driving -two Wooden Mould Press MachineNegotiableMOQ: 1 Piece
-
Mini Tractor Assembly Line Tractor Assembly LineUS$ 10 - 100MOQ: 1 Meter
-
Hydraulic Metal Stamping Press MachineUS$ 1 - 10MOQ: 500 Kilograms
-
3L Electric Adjustable Time Centralized Lubricant Punching MachinesUS$ 50 - 150MOQ: 1 Piece
-
New Design Feed Embossing MachineUS$ 2,333 - 5,222MOQ: 1 Set
-
Micro Irrigation Parts Simple Punch,micro Irrigation Parts Simple Punch,micro Irrigation Parts Simple PunchUS$ 250,000 - 350,000MOQ: 1 Set
-
High Speed Aluminium Foil Punching MachineUS$ 10,000 - 100,000MOQ: 1 Set
