Contact Platform Support
Help CenterHot Selling 150W Foam Cutting Hot Knife With High Quality
Related Products
-
Rotary Tool Accessory Set / 71pcs Accessory Kit/mini Accessory Kits /NegotiableMOQ: 100 Sets -
Kmj-17001 Rotary Tool Accessory Set /170pcs Accessory Kit / Mini Accessory KitsNegotiableMOQ: 100 Sets
-
KMJ -630 Industrial Designed 2000W Electric Heat GunNegotiableMOQ: 5 Pieces
-
High Speed Power Tools Angle Grinder With 300wNegotiableMOQ: 50 Pieces
-
1300W /180m High Quality Power Tool ,polisherNegotiableMOQ: 50 Pieces
Specifications
place of origin: dongguan,china(mainland)tpye: foam cutting knife
brand name :KMJ
max power:150W
Specifications
The hot knife can cut Styrofoam, Polyethylene,
PVC, ABS, Rubber,etc
Seal the edges with minimum of smoke
No burned edges..
Introduction
The Hot Knife is a professional-grade hot cutting tool for foamed plastics. Can heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.
Recommended Use
Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), Polyethylene, Cross-Linked Polyethylene, Polypropylenes, and many other foamed plastics and materials can be easily cut with KD-5H Hot Knife. Check with the foam manufacturer for safe and proper cutting procedures
Recommended Use
Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), Polyethylene, Cross-Linked Polyethylene, Polypropylenes, and many other foamed plastics and materials can be easily cut. Check with the foam manufacturer for safe and proper cutting procedures
Operation
Put your temperature control knob at midrange setting, place the blade against the edge of the foam and depress trigger. Optimum cutting should be virtually smoke free.
NOTE: For the best results, practice on scrap pieces of foam.
When cutting foam it is best to keep the temperature and speed consistent. If smoke develops during the cut, you are cutting too slow or the blade is to hot which could result in an oversized, uneven cut. This can be remedied by lowering the temperature and intermittently releasing the trigger during your cut. As the cutting resistance increases, depress the trigger again. The Hot Knife will reach the set temperature within seconds. You can accomplish your cut with minimal smoke using this process. Cutting in this manner will also prolong the life of the knife.
Releasing the trigger approximately one or tow inches prior to the completion of the cut will help keep the blade clean and free from buildup
The selected cutting blade should not be longer than 3/4” past the thickness of your foam board. The foam cools the blade as it cuts. The exposed portion can overheat and cause your blade to warp.
Send Inquiry to This Supplier
You May Also Like
-
Riveting GunNegotiableMOQ: 2 Units
-
HZZD-501Multi-function Full-automatic Oscillator for gc Gas ChromatographyUS$ 5,000 - 5,000MOQ: 1 Set
-
SEAFLO DC Solar Water Pump Germany in Paddy FieldUS$ 87.05 - 95.77MOQ: 8 Pieces
-
MT9115 1900w Stone Cutter MachineUS$ 1 - 100MOQ: 200 Pieces
-
Hot Selling Cutter for Wooden Beads,alloy Wooden Buddha Beads ToolsNegotiableMOQ: 50 Pieces
-
Powerful 450W Electric Sheep ClipperNegotiableMOQ: 1
-
Electric Scissors for Cutting Fabric,electric Fabric ScissorsUS$ 60 - 90MOQ: 10 Pieces
-
SLB60100 PlanerNegotiableMOQ: 1 Set
-
Manual 2.0mm Metal Steel Steel Cutting Machine Electric Power Tools NibblerUS$ 50 - 100MOQ: 50 Sets
-
Electrical Control and EquipmentUS$ 1 - 9,999MOQ: 5 Pieces
