Hot Saling High Quality Chainsaw

Chainsaw Construction

1. Engine — almost a two-stroke gasoline (petrol) internal combustion engine, usually with a cylinder volume of 30–120 cm³ or an electric motor.
2. Drive mechanism — typically a centrifugal clutch and sprocket.
3. Guide bar — an elongated bar with a round end of wear-resistant alloy steel typically 16 to 36 inches in length. An edge slot guides the cutting chain. Specialized loop-style bars, called bow bars, were also used at one time for bucking logs and clearing brush, although they are now rarely encountered due to increased hazards of operation.
4. Cutting chain — Usually each segment in this chain (which is constructed from riveted metal sections similar to a bicycle chain, but without rollers) features small cutting teeth.

 Oil Chainsaw details pictures  

Chainsaw Working techniques

• Sizeup - This is scouting and planning safe cuts, before starting the saw.
• Felling - The aim is for the tree to fall safely for limbing and cross cutting the log.
• Limbing - This is cutting the branches off the log. The operator must be able to properly reach the cut to avoid kickback
• Bucking - This is cross cutting the felled log into sections. Setup is made to avoid binding the chainsaw within the changing log tensions and compressions.
• Binds - This is when the chainsaw is at risk or is stuck in the log compression.
• Top bind — The tension area on log bottom, compression on top.
• Bottom bind — The tension area on log top, compression on bottom.
• Side bind — Sideways pressure exerted on log.
• End bind — Weight compresses the log’s entire cross section.
• Brushing and Slashing - This is quickly clearing small trees and branches under 5 inches diameter.

 Chainsaw Standard Accessories   

 Chainsaw Packaging showing  

IN THE BOX

• 1 x chainsaw
• 1 xTool Kit
• 1 x User Manual
• 1 x Oiler
• 1 x 22" bar
• 1 x 22" chain
• 1 x bar cover

 Chainsaw Shipping

Container shipping :

Sample  or retail shipping :

 Working shop

OUR TEAM

Dear friend,Special remind just for you only!   

For your safety, when using the chain saw, please  

pay attention to the points:

1. Use both hands firmly hold chain saw.

2. Do not use the standpoint of instability or ladder;

 3. Don't cut too far target;

 4.Don't cut higher than the target of the shoulders;

After service

1.The whole set of machine is guaranteed for one year

2.We can provide you with best after service if you have any question at any time.

My dear friend ,What can i do for you ?            

Tina  Yao

Skype : toodtools05

Ph:+86-579-87152331

Fax:+86-57987152332

 More chainsaw information ,pls click this !