Contact Platform Support
Help CenterAnti uv Plastic pp Weed Mat
Related Products
-
New100% HDPE Anti U.V. Agriculture Landscape CoverUS$ 2 - 3.5MOQ: 1000 Pieces -
pp Woven Fabric Ground Film CoverUS$ 2 - 3.5MOQ: 1000 Pieces
-
pp Spunbond Nonwoven Ground Cover Fabric With uv TreatedUS$ 2 - 3.5MOQ: 1000 Pieces
-
Plastic Ground Cover Mat for Garden pp Woven MeshUS$ 2 - 3.5MOQ: 1000 Pieces
-
Weed Barrier Fabric Ground Cover ClothUS$ 2 - 3.5MOQ: 1000 Pieces
Areas of application:
Cultivation of ornamental plants (flowerbeds, designing front gardens)
For creating herbaceous borders or rock gardens
For planting hedges
For planting on mounds and slope reinforcement
Beneath rock, paved or gravel paths
For vegetable gardens
In greenhouses or hotbeds
Beneath sandpits or other sand surfaces
Advantages:
Efficiently inhibits the growth of weeds
Ideal substitute for chemical herbicides
Improved retention of moisture in the ground; also during longer dry periods
If the fleece is used as the top layer (e.g. for growing tomatoes, cucumbers, etc.), improved heating of the ground due to sunlight absorption
The fleece is tear resistant, breathable and weatherproof
The material is not harmful to plants and neutral for the ground and water
Material:
100% polypropylene
Quality:
The cheap weed control sheeting, which can often be found on the market, is made of simple, extremely thin black plastic foil with many small holes. However, these foils are neither permeable to water nor breathable. They tear quickly upon contact with smaller stones, roots or when being pulled. There is a risk of fungi or mould forming underneath these plastic foils because they are not permeable to air over the entire surface.
We on the other hand, provide a special, high quality fleece fabric, which is breathable and permeable to water over the entire surface. It was specifically developed for the use in gardens, is extremely tear resistant and has innumerable fine pores, which can only be seen when magnified
The water permeability of the weed control fleece can be seen well in the magnified image, in which the fleece was formed into a small pouch and then, filled with water
1. Prepared bed
2. The weed control fleece can be easily cut to the respective size using scissors
3. The plants are positioned on the fleece according to requirements
4. Cut an “X” into the spot, where the plant is to be planted – a carpet cutter or scissors can be helpful for this purpose
5. Dig out a planting hole in the cut out spot and put the plant into it
6. After inserting the plant, wrap the four cut out corners closely around the stem of the plant, to prevent weeds from sprouting directly by the plant
7. Then, cover the weed control fleece with a layer of approx. 5-10 cm of mulch material (e.g. bark mulch) to protect it against direct sunlight
Send Inquiry to This Supplier
You May Also Like
-
Greenhouse Film PE Greenhouse FilmUS$ 1.5 - 2.5MOQ: 1000 Kilograms
-
Red Soluble Strip Laundry Bag Dissoluble Laundry Bag Custom Large PVA Water Soluble Tie With PE Laundry Bag BOLIUS$ 0.15 - 0.2MOQ: 10 Pieces
-
Cherry Tree Plastic CoverUS$ 0.10MOQ: 1 Square Meter
-
MOCAP LDPE Black Round Decorative Pipe End CapNegotiableMOQ: 100 Pieces
-
Horse Equipment Stable Mat Horse Mat EVA Cow MatUS$ 13.5 - 35.4MOQ: 100 Pieces
-
High Quality of Steel Post Safety PE Scaffolding Tube End CapUS$ 0.06 - 0.075MOQ: 50000 Pieces
-
Temporary Plastic Flooring for Animal DungUS$ 1 - 6MOQ: 100 Units
-
Indoor Backlit Film for AdvertisementUS$ 4 - 16MOQ: 1 Square Meter
-
Hot Sale 200 Micron uv Resistant Greenhouse Plastic FilmUS$ 0.8 - 1.5MOQ: 10000 Square Meters
-
Tomato Heper Plastic TiebackUS$ 0.5 - 2MOQ: 6000 Pieces
