Contact Platform Support
Help CenterWaterproof Tent Cover Landscape Fabric
Related Products
-
Cheap pp Spunbond Nonwoven for Garden Weed ControlUS$ 2 - 3.5MOQ: 1000 Pieces -
PP PE Non Woven Polypropylene Fabric Weed Control MatUS$ 2 - 3.5MOQ: 1000 Pieces
-
pp Spunbond Nonwoven Fabric Ground Cover Weed Control MatUS$ 2 - 3.5MOQ: 1000 Pieces
-
Spunbond Nonwoven Fabric Weed Barrier CoverUS$ 2 - 3.5MOQ: 1000 Pieces
-
Garden Line Weed Control CoverUS$ 2 - 3.5MOQ: 3000 Pieces
waterproof tent cover black plastic ground cover recycled polypropylene mat
Ground cover fabric is a must for every serious gardener and landscaper
Helps control grass and weeds in gardens and greenhouses
Woven design resist tears and punctures but is still permeable
Easy to use - roll out and tack down
Features green stripes every 12 inches for easy measuring and plant alignment
Quality:
The cheap weed control sheeting, which can often be found on the market, is made of simple, extremely thin black plastic foil with many small holes. However, these foils are neither permeable to water nor breathable. They tear quickly upon contact with smaller stones, roots or when being pulled. There is a risk of fungi or mould forming underneath these plastic foils because they are not permeable to air over the entire surface.
We on the other hand, provide a special, high quality fleece fabric, which is breathable and permeable to water over the entire surface. It was specifically developed for the use in gardens, is extremely tear resistant and has innumerable fine pores, which can only be seen when magnified
The water permeability of the weed control fleece can be seen well in the magnified image, in which the fleece was formed into a small pouch and then, filled with water
1. Prepared bed
2. The weed control fleece can be easily cut to the respective size using scissors
3. The plants are positioned on the fleece according to requirements
4. Cut an “X” into the spot, where the plant is to be planted – a carpet cutter or scissors can be helpful for this purpose
5. Dig out a planting hole in the cut out spot and put the plant into it
6. After inserting the plant, wrap the four cut out corners closely around the stem of the plant, to prevent weeds from sprouting directly by the plant
7. Then, cover the weed control fleece with a layer of approx. 5-10 cm of mulch material (e.g. bark mulch) to protect it against direct sunlight
Send Inquiry to This Supplier
You May Also Like
-
Greenhouse Film PE Greenhouse FilmUS$ 1.5 - 2.5MOQ: 1000 Kilograms
-
Red Soluble Strip Laundry Bag Dissoluble Laundry Bag Custom Large PVA Water Soluble Tie With PE Laundry Bag BOLIUS$ 0.15 - 0.2MOQ: 10 Pieces
-
Cherry Tree Plastic CoverUS$ 0.10MOQ: 1 Square Meter
-
MOCAP LDPE Black Round Decorative Pipe End CapNegotiableMOQ: 100 Pieces
-
Horse Equipment Stable Mat Horse Mat EVA Cow MatUS$ 13.5 - 35.4MOQ: 100 Pieces
-
High Quality of Steel Post Safety PE Scaffolding Tube End CapUS$ 0.06 - 0.075MOQ: 50000 Pieces
-
Temporary Plastic Flooring for Animal DungUS$ 1 - 6MOQ: 100 Units
-
Indoor Backlit Film for AdvertisementUS$ 4 - 16MOQ: 1 Square Meter
-
Hot Sale 200 Micron uv Resistant Greenhouse Plastic FilmUS$ 0.8 - 1.5MOQ: 10000 Square Meters
-
Tomato Heper Plastic TiebackUS$ 0.5 - 2MOQ: 6000 Pieces
