Contact Platform Support
Help CenterPET Filament Spunbond Needle Punched Geotextile Fabric Price
Related Products
-
Filament Spunbond Non-woven Geotextiles Fabrics for Sewage TreatmentUS$ 0.24 - 1.69MOQ: 10 Square Meters -
Filament Spunbond Nonwoven Geotextile High StrengthUS$ 0.24 - 1.69MOQ: 10 Square Meters
-
Filament Spunbond Nonwoven Geotextile Fabric for Retaining WallUS$ 0.26 - 1.98MOQ: 10 Square Meters
-
Puncture Resistance Filament Spunbond Needle Punched Nonwoven GeotextileUS$ 0.26 - 1.69MOQ: 10 Square Meters
-
Continuous Filament Needle Punched GeotextileNegotiableMOQ: 12 Square Meters
Specifications
PET Filament Spunbond Needle Punched Geotextile Fabric Price1.Good drainage performance
2.Good filtration performance
PET Filament Spunbond Needle Punched Geotextile Fabric Price
_____________________________________________________________________
Product Description
PET Filament Spunbond Needle Punched Geotextile is made polypropylene filament,
featured with good physical property,high tensile, resisiting tearing,bursting,stabling,etc.It
boasts excellent drainage,separation,filtration and protection performance.
_____________________________________________________________________
Product Specifications and Technical Parameters
|
item
|
Value
|
||||||||||
Nominal breaking strength /(KM/m) |
4.5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
||
1 |
Breaking strength(MD/CD)(KN/m) |
4.5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
|
2 |
Elongation at break (MD/CD)/% |
40-80 |
|||||||||
3 |
CBR mullen burst strength KN≥ |
0.8 |
1.6 |
1.9 |
2.9 |
3.9 |
5.3 |
6.4 |
7.9 |
8.5 |
|
4 |
Tear strength/KN |
0.14 |
0.21 |
0.28 |
0.42 |
0.56 |
0.70 |
0.82 |
1.10 |
1.25 |
|
5 |
Sieve size O90 mm |
0.05-0.20 |
|||||||||
6 |
Vertical permeability coefficient cm/s |
K×(10-1-10-3)K=1.0-9.9 |
|||||||||
7 |
Thickess/mm ≥ |
0. 8 |
1.2 |
1.6 |
2.2 |
2.8 |
3.4 |
4.2 |
5.5 |
6.8 |
|
8 |
Width variation% |
-0.5 |
|||||||||
9 |
Weight variation |
-5 |
|||||||||
_____________________________________________________________________
Geotextile joints to connect
General Geotextile joints to connect there is overlap, welding and oversew three ways.
Note:If geotextile joints to connect on the flat ground, overlap width>30cm.
If geotextile joints to connect not on the flat ground, overlap width>50cm.
_____________________________________________________________________
Application Range
Used in the area of highway, railway, dam, coastal beach for rein forcement, filtration, separation and
drainage, especially used in salt marshes and garbage burying field.
_____________________________________________________________________
Picture Information
Production Line
Construction Project
Send Inquiry to This Supplier
You May Also Like
-
Low-permeability Geotextile-made Cement Blanket Geosynthetic Concrete Blanket Lining for Erosion and Sediment ControlUS$ 1 - 1.5MOQ: 100 Square Meters
-
2"x4"mesh Wire Backed Silt Fence Direct FactoryUS$ 10 - 20MOQ: 1 Roll
-
Polyester Long Fiber Continuous Filament Spunbond Needle Punched Nonwoven GeotextileUS$ 0.18 - 1.7MOQ: 5000 Square Meters
-
Wandafu Greenhouse Planting Heavy-Dut Landscape Gardening Weed Barrier MatUS$ 0.18 - 0.19MOQ: 10000 Square Meters
-
High-Strength Geotextile - Durable, Permeable for Road Construction & Drainage ProjectsUS$ 2 - 3MOQ: 100 Cubic Meters
-
YS020C Geotextile Vertical Permeability TesterNegotiableMOQ: 1 Unit
-
Polymer Protective Drainage Profiled Sheet Four-way Siphon Drainage Trough GeotextileNegotiableMOQ: 0
-
Unidirectional Plastic Geogrid for Soft Ground Treatment. Plastic Geogrid for Ground StabilizationUS$ 0.3 - 2.56MOQ: 100 Square Meters
-
250mm Outer Diameter Green Plastic Blind Ditch Weight 2400 GramsNegotiableMOQ: 1000 Square Meters
-
Mesh Interwoven Drainage Board, Plastic Geotextile Mat, Seepage Drainage 30mm ThickNegotiableMOQ: 1000 Square Meters
