floral foam for square box roses, square floral foam, square flower mud

We are specializing in exporting wet floral foam, floral foam machine, technology and chemial materials.

Our company have one floral foam factory , the factory's name is Hebei Huiya Floral Foam special equipment Co.,Ltd. So we can give you the good price and we can guarantee the quality of our floral foam .

Wet floral foam for flower

We are a professional enterprise of highly efficient and energy-saving equipment and technology, integrating research and development, production, marketing and service.

Our main business range includes:

Ø The floral foam production Line
Ø Floral foam Machines & Technology
Ø Chemical materials for making floral foam
Ø Various size of floral foam

In 23 * 11 * 8 cm/piece of floral foam quality standards:

1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements.
2.Foliage green in color.
3.Density: 25KG/M³
4.Water absorption time: ABT. 1 minute (60 secs)
5.Dry brick weight: 45g(+/- 3g)
6.Wet brick weight: 2000g (+/- 15g)
7.Water drainage / leakage: 0g
8.Cell Structure: Fine
9.Brown water: No
10.PH level: PH 5.8-6.5
11.Water retain period: 7 days & above (Depend on the local climate)

How to Make a Floral Foam Arrangement

A floral foam display is ideal if you want to create a low, compact design or a defined shape on a larger scale. Learn how to create the rounded or graduated contours that characterizes these arrangements.

Floral foam must be soaked before you trim it, position it and then arrange the flowers and foliage. Drop a block of floral foam into a bowl or bucket of water and lift it out as soon as it appears to have completely absorbed water or sunk to the bottom of the bucket. Don’t leave it in the water too long or it will begin to disintegrate. It's also worth using a hand spray regularly while you work to refresh the flowers.

Gather Your Flowers and Tools

Use 6-8 stems each of two different types of foliage and 7-11 stems each of three varieties of flower (or 2-3 stems if using spray flowers) for this small arrangement. Condition your flowers and foliage. The stems will be cut quite short when you arrange them, so they don't need to be left too long when you condition them.

From left: white single roses, purple veronica, white lisianthus, salal stems and eucalyptus stems (image 1)

Place half a block of soaked floral foam in the shallow bowl, trim the corners of the foam with a craft knife and bind it to the bowl with stem tape (image 2).

Insert the First Stems

Trim the smaller stems from the different sprays of foliage and use one variety of foliage to create a skeleton framework. Insert a stem at an angle in each side of the foam at the base (so the leaves are angled downward to hide the base of the bowl). Insert three stems in a line across the top of the foam. Press the stems firmly, but not too far, into the foam, about 3/4 inch deep.

Add the Second Variety of Foliage

Add a few stems of the second type of foliage at an angle to fill the natural spaces in the foam. You want to achieve an even, rounded shape with the angled leaves, but not all the foam should be hidden at this stage.

Add the Largest Flower Heads

Use the largest flower heads next: Trim each stem to approximately 4 inches and insert it at an angle. Angle the flower heads inserted around the base of the foam downward, and those at the top angled upward. Give the flowers and foliage a quick misting.

Insert More Flowers

Insert the flowers evenly around the arrangement. Move the arrangement around as you work so that you distribute the flowers evenly. Here, four flowers have been inserted around the lower part of the foam, and three around the upper part.

Add Smaller Flowers

Add a smaller flower next; spire-shaped flowers work well in an arrangement like this. Insert them at an angle in between the first flowers. Allow these spiky flowers to rise up out of the arrangement slightly to break the rounded contours of the other blooms.

Fill Obvious Gaps

If you use a variety of spray-shaped flower, cut off the shorter stems to use as individual blooms. Insert them into any obvious gaps in the arrangement.

Drain and Mist the Arrangement

Turn the arrangement around one last time to check for any gaps or visible foam, and fill or cover them with a stem of foliage.

Give the flowers and foliage a good misting with a hand mister. Before putting the display in position, tilt it over a kitchen sink to allow excess water to drain away, then dry the base of the container; this is especially important if you intend to hang a floral foam display as a pew end, for example.

To prolong the life of the flowers, the foam must be kept moist: every 3-4 days, sit the arrangement on the draining board of the kitchen sink and gently pour a jug of water over it. Then mist the flowers and foliage again.

Hebei Huiya Floral Foam Special Equipment Co., Ltd. was founded in 2015, which is located in DingZhou City, Hebei Province. Xuzhou Huiya Imp.&Exp. Co., Ltd. was founded in 2012, which is located in Xuzhou City, Jiangsu Province.

Our company is engaged in the export of floral foam, floral foam production line and other energy-saving products. At the beginning, the company went through business hardships and depression of the market, which makes the enterprise enjoy rapid growth. With the help of good management, we have established a good enterprise image. Our company insists on the principle of Quality First, Reputation Foremost, Constant Improvementto do business with the clients home and abroad. Our company is doing the best to provide new and old customers with high-quality product and service.

In the process of continuous research and practice,we updated the production technology and production equipment and overcame the disadvantages and manual production equipment.We not only reduced the process if resin dehydration ,but also realized the continuous automatic foaming.The improvements achieve automatic production,which can greatly reduce the production cost,enhance the product quality and make product quality stable and easy to control,solve the problems of environment protection and pollution.

We fully engage in developing the market of automatic production of floral foam home and abroad .

Our products have been exported to many countries.We have exported our machine and technology to India,Indonesia, Venezuela, Pakistan Vietnam, Kazakhstan, Armenia, Russia, Iran,Turkey,Mexico etc.

The good quality and service have earned us good reputation from customers. Sincerely welcome the new and old customers.

We sincerely wish that we could establish a long and friendly business relationship with more companies home and abroad.

1.Can I get free samples of floral foam ?
YES. We would like to send several samples for your reference if you could afford freight.

2.What surface handing could you support floral foam?
We can provide help buyer print logo on the foam and carton.

3.Do you accept customized floral foam order ?
YES. We can arrange opening the mould according to customers’ requirement.

4. What is the normal lead time ?
(1). For stock products, we will send goods to you within 12-24hours after we receive your payment.
(2). For surface handing products, the delivery time is within 7-10 work days after we receive your payment.
(3). For products we never manufactured , we could open the mould if needed.

5. What is your selection of shipping method ?
(1). For small trial order, international express, just as UPS, FedEx, TNT, EMS, DHL is suitable.
(2). For large order, we can arrange shipment by sea or air according to your requirement.

6.How do you control the quality floral foam?
We do 3 times leakage test before packing.

7.If any defective floral foam, how do you deal with ?
We have 1:1 replacement for the defective floral foam.

8.Which trade terms do you prefer?
We can accept FOB, C&F, CIF,etc.

9.What's your Payment terms floral foam?
T /T, Western Union, etc.