Our company have one floral foam factory , the factory's name is Hebei Huiya Floral Foam special equipment Co.,Ltd. So we can give you the good price and we can guarantee the quality of our floral foam .
In 23 * 11 * 8 cm/piece of floral foam quality standards:
1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements.
2.Foliage green in color.
3.Density: 25KG/M³
4.Water absorption time: ABT. 1 minute (60 secs)
5.Dry brick weight: 45g(+/- 3g)
6.Wet brick weight: 2000g (+/- 15g)
7.Water drainage / leakage: 0g
8.Cell Structure: Fine
9.Brown water: No
10.PH level: PH 5.8-6.5
11.Water retain period: 7 days & above (Depend on the local climate)
Wet floral foam for flower florist supplies of floral foam
We are a professional enterprise of highly efficient and energy-saving equipment and technology, integrating research and development, production, marketing and service.
Our main business range includes:
Ø The floral foam production Line
Ø Floral foam Machines & Technology
Ø Chemical materials for making floral foam florist supplies of floral foam
Ø Various size of floral foam florist supplies of floral foam
We are specializing in exporting wet floral foam, floral foam machine, technology and chemial materials.
Fresh floral foam
Foam size:23*11*8cm/piece
Packaging:20piece/carton
Box size:25*56*33cm
Weight:1.5kg/carton
Price:FOB TIANJIN USD4.8 per carton
Bridal Bouquet
Foam size:∅8*18cm
Packaging:60set/carton
Box size:54*32*24cm
Weight:2.4kg/carton
Price:FOBTIANJIN USD0.3/set
Single heart(with foam)
Foam size:22*22*4cm
Packaging:30piece/carton
Box size:55*32*24cm
Weight :2.8kg/carton
Price:FOBTIANJIN USD0.4/piece
Round shape of foam
Foam size:∅18*4cm
Packaing:27piece/carton
Box size:55*32*24cm
Weight :1.2kg/carton
Price:FOBTIANJIN USD0.3/piece
How to Make a Floral Foam Arrangement
A floral foam display is ideal if you want to create a low, compact design or a defined shape on a larger scale. Learn how to create the rounded or graduated contours that characterizes these arrangements.
Floral foam must be soaked before you trim it, position it and then arrange the flowers and foliage. Drop a block of floral foam into a bowl or bucket of water and lift it out as soon as it appears to have completely absorbed water or sunk to the bottom of the bucket. Don’t leave it in the water too long or it will begin to disintegrate. It's also worth using a hand spray regularly while you work to refresh the flowers.
Gather Your Flowers and Tools
Use 6-8 stems each of two different types of foliage and 7-11 stems each of three varieties of flower (or 2-3 stems if using spray flowers) for this small arrangement. Condition your flowers and foliage. The stems will be cut quite short when you arrange them, so they don't need to be left too long when you condition them.
From left: white single roses, purple veronica, white lisianthus, salal stems and eucalyptus stems (image 1)
Place half a block of soaked floral foam in the shallow bowl, trim the corners of the foam with a craft knife and bind it to the bowl with stem tape
Insert the First Stems
Trim the smaller stems from the different sprays of foliage and use one variety of foliage to create a skeleton framework. Insert a stem at an angle in each side of the foam at the base (so the leaves are angled downward to hide the base of the bowl). Insert three stems in a line across the top of the foam. Press the stems firmly, but not too far, into the foam, about 3/4 inch deep.
Add the Second Variety of Foliage
Add a few stems of the second type of foliage at an angle to fill the natural spaces in the foam. You want to achieve an even, rounded shape with the angled leaves, but not all the foam should be hidden at this stage.
Add the Largest Flower Heads
Use the largest flower heads next: Trim each stem to approximately 4 inches and insert it at an angle. Angle the flower heads inserted around the base of the foam downward, and those at the top angled upward. Give the flowers and foliage a quick misting.
Insert More Flowers
Insert the flowers evenly around the arrangement. Move the arrangement around as you work so that you distribute the flowers evenly. Here, four flowers have been inserted around the lower part of the foam, and three around the upper part.
Add Smaller Flowers
Add a smaller flower next; spire-shaped flowers work well in an arrangement like this. Insert them at an angle in between the first flowers. Allow these spiky flowers to rise up out of the arrangement slightly to break the rounded contours of the other blooms.
Fill Obvious Gaps
If you use a variety of spray-shaped flower, cut off the shorter stems to use as individual blooms. Insert them into any obvious gaps in the arrangement.
Drain and Mist the Arrangement
Turn the arrangement around one last time to check for any gaps or visible foam, and fill or cover them with a stem of foliage.
Give the flowers and foliage a good misting with a hand mister. Before putting the display in position, tilt it over a kitchen sink to allow excess water to drain away, then dry the base of the container; this is especially important if you intend to hang a floral foam display as a pew end, for example.
To prolong the life of the flowers, the foam must be kept moist: every 3-4 days, sit the arrangement on the draining board of the kitchen sink and gently pour a jug of water over it. Then mist the flowers and foliage again.
1.Can I get free samples of floral foam ?
YES. We would like to send several samples for your reference if you could afford freight.
2.What surface handing could you support ?
We can provide help buyer print logo on the foam and carton.
3.Do you accept customized floral foam order ?
YES. We can arrange opening the mould according to customers’ requirement.
4. What is the normal lead time to product the floral foam ?
(1). For stock products, we will send goods to you within 12-24hours after we receive your payment.
(2). For surface handing products, the delivery time is within 7-10 work days after we receive your payment.
(3). For products we never manufactured , we could open the mould if needed.
5. What is your selection of shipping method ?
(1). For small trial order, international express, just as UPS, FedEx, TNT, EMS, DHL is suitable.
(2). For large order, we can arrange shipment by sea or air according to your requirement.
6.How do you control the floral foam quality ?
We do 3 times leakage test before packing.
7.If any defective floral foam, how do you deal with ?
We have 1:1 replacement for the defective floral foam.
8.Which trade terms do you prefer?
We can accept FOB, C&F, CIF,etc.
9.What's your Payment terms?
T /T, Western Union, etc.
Send Inquiry to This Supplier
You May Also Like
-
Hot Popular Heart Shaped Wall Decoration White Color Full Willow Round Shape Flower WreathUS$ 1 - 10MOQ: 50 Pieces
-
Cotton Crothet FlowerUS$ 0.2 - 1.99MOQ: 500 Pieces
-
Aidocrystal Latest Product Simulation Flower Letter & for Wedding Bridal Bridegroom Name Combination DecorativeUS$ 38 - 129MOQ: 1 Piece
-
Hawaii Hair Accessories Beach Party Dress Hawaii AccessoriesNegotiableMOQ: 1440 Sets
-
FlowerNegotiableMOQ: 1
-
Artificial Crysantium Flower /Plastic Flower Mum FlowerUS$ 0.6 - 0.68MOQ: 2000 Pieces
-
10 Head Decor Rose Artificial Flowers Silk Flowers Floral Latex Real Touch Rose Wedding Bouquet Home Party Design FlowersUS$ 1 - 100MOQ: 100 Pieces
-
Peach FlowerUS$ 0.3 - 0.6MOQ: 1000 Pieces
-
707060 ARTIFICIAL FLOWERNegotiableMOQ: 3000 Pieces
-
DIY Ribbon Flower/ Make Ribbon Flowers/ Handmade Ribbon FlowersUS$ 0.1 - 0.8MOQ: 1000 Bags
















