120*80 compression fiber glass shower trays, SMC shower base,shower pan

120*80 compression fiber glass shower trays, SMC shower base,shower pan made via SMC process

 Procedure for SMC (sheet moulding compound) process:         

1. The material of moulds will be depended on your requirements on products and total quantity. Usually we use steel 45#, 60#, Chrome 40, P20 or 718.   2. Core and Cavity surface with Chrome plating can prolong mould life and surface glossy of products.

1.We have our own complete production line for fiberglass sheet, from raw material, including fiberglass mat, resin and other fillers.   2.We have material engineers, who can adjust the material components according to your detailed requests such as strength, fire resistance rating, color and so on.

1.We have compression machine from 60 tons to 2000 tons, which enable us to produce items with maximum projected area 4 square meters       2.According to products, we will adjust working pressure, working temperature,solidifying time for the machine.

1. Trim the burrs and then polish the surface. Painting is available if you required painted surface   2.Special fextures are used to correct the deformation caused by the draft angle if necessary.

Every piece will be wrapped with air bubble paper, then packed into carton boxes or plywood shelves.

  Our principle: safe and economical                                          

Packaging:  1.Air bubble packaging

                     2.Plywood Crate or shelf packaging

                     3.Carton packaging

We choose economical packaging on condition that there will be no damage during transportation.

Shipping: We are very glad to get the freight cost information for you as we have forwarders which have been cooperated for a long time.

Our workshop and office:                                                          

Quality Control                                                                             

Why choose us:                                                                           

1)  8 years' experience in fibrglass product trading, have good knowledge on process, quality control, request on different products, ready to offer international service for you.

2)  Complete production line from fiberglass sheet to mould and finished products,which keeps a better quality control and will also save cost for you.

3)  Hydraulic Press Machines with capacity from 60 to 2000 tons, which enable us to make products with maximum projected area of 4 square meters, so that we can meet your different size requirements.

4)  150km away from Shanghai Port, which will shorten the delivery time and save freight cost for you.