Hard Felt Wheel
Wool Felt Polishing Wheels are made from selected long fiber wool and contain no resins, lacquers, or synthetic fibers. Hardness or density is achieved through carefully controlled fulling and hydraulic pressing.
SOFT
Soft wheels are generally used for rounded surfaces and for special applications requiring minimal pressure and cutting action. This density is used quite generally in glass, granite and marble work.
MEDIUM
Medium polishing wheels are recommended for most industrial work and readily adapt to either flat or rounded surfaces. they are often used in buffing and color buffing operations in conjunction with other cutting agents and lubricants.
HARD
Hard felt wheels are usually used on flat surfaces or in applications where it is necessary to contour the wheel to the configuration of the piece part. This is the density normally used by lapidarists and jewelry manufacturers.
ROCK HARD
Rock hard felt wheels are used in operations demanding maximum cutting pressure and where sharp edges or critical contours on the piece part require close tolerance or complex wheel shaping.
Specifications:
STORAGE
Store spare wheels in a dry, protected place. Stack the wheels, one exactly on top of another and well above the floor. Keep all excessive heat and moisture away.
Item No | Density (g/cm3) | Diameter (mm) | Thickness (mm) | Wool Percent (%) | Note |
T113-01 | 0.35~0.70 | 20—800 | 3-70 | 100 | No plastic cap |
T113-02 | 0.35~0.55 | 20—500 | Customer request | 100 | With plastic cap |
Remark: If for special specifications and usage, it can be ordered separately. | |||||
Send Inquiry to This Supplier
You May Also Like
-
Hot Sale Wet Diamond Polishing Pads for Polishing Marble, GraniteUS$ 1 - 5MOQ: 24 Pieces
-
100% Wool Felt Polishing Wheel for GlassUS$ 7 - 10MOQ: 100 Pieces
-
HIGH QUALITY 8 PIECE DIFFERENT SHAPES DIAMOND ABRASIVE GRINDING MOUNTED POINT SET WITH 2.35mm SHANKNegotiableMOQ: 600 Sets
-
Furniture Hardware ToolsNegotiableMOQ: 1 Piece
-
Brand Sportswear Tennis Suit Digital Print Custom (factory Direct)NegotiableMOQ: 1 Piece
-
Fiberglass Reinforced Mesh Discs for Grinding WheelNegotiableMOQ: 1
-
8.4 Inch Color TFT Display PC Based CNC Controller Compatible With Servo DriveNegotiableMOQ: 1 Piece
-
Grinding Wheel for Woodworking ToolsNegotiableMOQ: 10 Pieces
-
Disc Cutting Abrasive Grinding Wheel For CarbideUS$ 2 - 8MOQ: 10 Pieces
-
High Pressure 100%wool Felt Gaskets and Felt Ring SealUS$ 0.1 - 48MOQ: 1 Piece



