Contact Platform Support
Help Center11oz Full Printing Mug Wrap Printed on Mug Handle and Bottom
Related Products
-
New Wholesale CE 3D Automatic Combo Sublimation Vacuum Heat Press Trasfer MachineUS$ 480 - 700MOQ: 1 Set -
Wholesale Personalized Custom Multicolor Manual Swing T Shirt Printing Machine For PrintingUS$ 200 - 350MOQ: 1 Set
-
Best Industrial Wholesale Prices High Quality Digital Dye Sublimation 3D T-Shirt Printing MachineUS$ 322 - 342MOQ: 1 Set
-
Best Wholesale Prices Semi Automatic Heat Press Transfer T Shirt Printing MachineUS$ 99 - 239MOQ: 1 Set
-
Wholesale Low Price Digital Semi Automatic T Shirt Heat Press Transfer Printing MachineUS$ 321 - 341MOQ: 1 Set
11oz Full Printing Mug Wrap
Item no. |
BDF |
Usage |
Print 11oz mug |
Material |
Silicone and Glass lid |
Color |
Blue |
MOQ |
1,000 pcs |
Packing |
One Piece packed one small box |
Port of Loading |
Guangzhou/Ningbo/Shanghai |
Q: The printing turns to be unclear.
A: 1) Check the vacuum gauge if the vacuum pressure reaches 600/ mmhg. If the pressure fails to reach the value, leakage can be assured. Check the vacuum extracting strip to see if it’s well sealed.
2) Check connectors of the pipe if there are some looseness or leakage.
Q: What if automatic operation failed, including air extraction, suction and countdown?
A: Adjust the distance between the vacuum extracting plate and the switch. Normally, the distance shall be at 3mm, magnet strength will be weak if the distance is too far.
Q: What if abnormal sound occurs and the machine fails to run normally?
A: 1) Open the cover of the rear power box and check if any wind-up on the vacuum fan. If there is, unwire it.
2) Check if any water in the air filter. Water shall be poured out and the filter core shall be replaced periodically.
Q: The machine fails to heat and rise temperature.
A: 1) Check if the heating switch has been turned on and the indicators on the display are glistening. If not, turn on the switch.
Q: A big gap is found between the set and real temperature.
1) Overheating within 30 ℃ is acceptable when the metal heating pipes work;
2) Check if the cooling fan beneath the circuit board works normally. If any damage, replace the fan.
3) The machine is designed with double circuit for temperature control, keeping the inner oven temperature below 250℃, or the machine will cease heating.
Send Inquiry to This Supplier
You May Also Like
-
Printing Machinery PartsNegotiableMOQ: 2600 Pieces
-
TaiWan Corona Dyne Test Pen for Film Surface Tension TestUS$ 15 - 16MOQ: 10 Pieces
-
TS5214N566 48-2500P8-L6-5V TAMAGAWA EncoderUS$ 1 - 2MOQ: 1 Piece
-
Variable Speed PulleyNegotiableMOQ: 1
-
Precison 3D Printing Machine Spare PartsUS$ 0.99 - 100MOQ: 1 Set
-
Holder & Cutter Plotter BladeUS$ 2 - 20MOQ: 10 Pieces
-
China Supplier Stitching Head Spare Parts Saddle Stitching PartsNegotiableMOQ: 1 Set
-
PU Printing RollerUS$ 1000.00 - 1000.00MOQ: 1 Piece
-
Paper Mill Machinery Part Pneumatic Scraper for Paper MakingUS$ 1 - 1,000MOQ: 1 Set
-
Hysteresis Brakes, Haibohua Hysteresis Dampers Ahb/hb, Manufacturer of Hysteresis BrakesUS$ 56MOQ: 5 Units
