Contact Platform Support
Help CenterLow Breathable Membrane for Roof Construction
Related Products
-
Pp-pe-pp Roofing FeltUS$ 0.2 - 0.8MOQ: 20000 Square Miles -
Polymer Roofing FeltsUS$ 0.2 - 0.5MOQ: 20000 Square Meters
-
Breathable Roofing MembraneUS$ 2,450 - 3,400MOQ: 1 Ton
-
Roofing Membrane or Roofing Felt (waterproof and Breathable)US$ 0.25 - 0.8MOQ: 2 Tons
-
Vapor Barrier or Wind Barrier or Breathable MembraneUS$ 20 - 40MOQ: 1 Ton
Specifications
our waterproof and breathable roofing membrane are good tearing strength, waterproof, soft handle
Material: A three layer highly breathable, fully waterproof membrane, constructed from high tensile spun-bonded polypropylene layers, around a microporous polypropylene film. The outer layer forms the functional waterproof surface; the middle layer is the breathable waterproof membrane and the inner layer protects the membrane from abrasion and damage, also giving additional strength. This enables the fabric to allow moisture vapour to pass through, whilst remaining fully waterproof.. We can provide various colors on uppor surface, printed with the trade name and head lap lines.
Use: Breathable roofing underlay positioned immediately above the insulation layer in a warm pitched roof, or in a cold pitched roof (ventilayed or unventilated). Breathable roofing underlay for use under tiles and sheeted roofs, over open rafters or on to fully boarded substrates. Breather membrane for timber frame wall construction.
Features: High performace breather membrane
Constructed from high tensile spun-bonded polypropylene layers
Higher levels of water resistance
Full moisture vapour permeability
Breathable underlay for tiled and slated pitched roofs
Eco-friendly to be completely recyclable
Weight: 80-400g/m2
Roll size: 1.5m×50m(75m2), 1.0m×50m(50m2)
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
Non-cured Rubber Asphalt Waterproof Coating/paintUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
Concrete Embedment Strip for Waterproof Geomembrane LinersNegotiableMOQ: 1 Piece
-
130g/m2 Breathable Membrane for WallsUS$ 0.43 - 0.43MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Wandafu Geomembrane Bag, Concrete Filling Sand Pipe Bag Concrete Filling Mold BagUS$ 1.28 - 1.48MOQ: 1000 Square Meters
-
Non-bitumen Anti-uv Pre-applied Hdpe Self Adhesive Waterproof SheetUS$ 2.0 - 6.0MOQ: 1000 Square Meters
