Home > Products > IAQ Detector/Controller > Wholesale gas detector for VOC
Wholesale gas detector for VOC
- 1000 Piece / Pieces per Month
- Sand Water Filter/Water treatment plants
- Automatic Doypack Seal Machine (insert and sealing machine)
- Deep well level transmitter
- Portable gas analyzer for detecting and measuring gas concentration K850 for power station
- Liquid level transmitter
- IPX3/IPX4 Hand-held Water Spray Nozzle Test Device IEC 60529
Product Details
Place of Origin: | Beijing, China | Brand Name: | Tongdy | Model Number: | F2000TSM-VOC-L |
Product Description
Specifications
High sensitive to contaminative gases and various kinds of odorous gases within the room (smoke, CO, alcohol, human odorWholesale gas detector for VOC
Indoor Air Quality-IAQ is a comprehensive concept involving various indoor gases and different kinds of low concentration pollutants. To detect and indicate IAQ level has becoming more and more important for the sake of establishing and maintaining healthy working and living environment.
F2000TSM-VOC-L series is specially designed to detect IAQ level in working and living environment and to further transmit the detected IAQ levels with corresponding analog output or to control a ventilator by one on/off output as pre-set IAQ level.
Its internal mixed gas sensor (normally called VOC sensor) is very sensitive to VOC concentration in the air (VOC i.e. Volatility Organic Compound, such as timber dope and toluene emitted by building materials), and other air pollutants such as cigarette smoke, ammonia and H2S. It also has high sensitivity to CO, alcohol, natural gas and odorous smells from human bodies. Compared with other single air sensor, Tongdy F2000TSM-VOC series is more suitable for IAQ detection in a long run.
F2000TSM-VOC series can also be used as a controller in application of ventilation and air conditioning systems to improve indoor air quality and to achieve the best energy saving.
¨ Features
u Wall mounting, real time detect indoor air quality
u With Japanese semiconductor mix gas sensor inside. 5~7 years lifetime.
u High sensitive to contaminative gases and various kinds of odorous gases within the room (smoke, CO, alcohol, human odor, material odor).
u Two types available: indicator and controller
u Indicator is special design with six indicator lights to indicate six different IAQ levels.
u Temperature and humidity compensation makes the IAQ measurements consistent.
u One on/off output for the IAQ controller. When IAQ concentration is higher than the set point , the relay turns on to control a fan or another ventilator.
u Four setting CO level ranges selectable to control the relay output via a set of jumpers.
u Optional Modbus RS-485 communication interface, 15KV antistatic protection, independent address setting.
¨ Application
u Detect Indoor Air Quality
u Can be used in houses, offices, theaters, shops, restaurants, train stations and many other places
u Automatically ventilation control
u Detect Indoor Air Quality and transmit the detected IAQ level to other devices
u Optional Modbus communication interface
NOTE: F2000TSM-VOC series cannot be used as a safety detector, for example, gas alert detector.
¨ Specifications
Gas detected | VOCs ( toluene emitted from wood finishing and construction products); Cigarette smoke( hydrogen, carbon monoxide); ammonia and H2S, alcohol, natural gas and smell by people’s body. |
Sensing element | Semiconductor mix gas sensor |
Power Supply | 24VAC/VDC 220/240VAC |
Consumption | 2.5 W |
Load (for the analog output) | >5K |
Sensor query frequency | Every 1s |
Warm up time | 48 hours (first time) 1 hour(operational) |
Six indicator lights | The first green indicator light:Best air quality The first and the second green indicator lights:Better air quality The first yellow indicator light:Good air quality The first and the second yellow indicator lights:Poor air quality The first red indicator light:Poorer air quality The first and the second indicator lights:Poorest air quality |
Analog output | 0~10VDC linear output |
Output resolution | 10Bit |
Relay output | One dry contact output, rated switching current 2A( resistance load) |
Modbus interface | RS485 with 19200bps(default), 15KV antistatic protection, independent base address |
Operation temperature | 0~50°C (32~122°F) |
Operation humidity | 0~95%RH,non condensing |
Storage conditions | -40~70°C (-40~158°F) |
Weight | 190g |
Dimensions | 100mm×80mm×28mm |
Installation standard | 65mm×65mm or 2”×4”wire box |
Wiring terminals | Maximum 7 terminals |
Housing | PC/ABS Plastic fireproof material , IP30 protection class |
Quality standard | ISO 9001 |
Contact Us
- Tongdy Sensing Technology Corporation (Beijing)
- Contact nameQing Tian
- Phone86-10-59738930-8075
- AddressBuilding 8, Courtyard 9, Dijin Rd.
- IPX5,IPX6 Jet Nozzle of IEC 60529, Brass material
- Adjustable and multifunctional Spring Impact Hammer IK01-IK07 Level Tester
- Test probe 43 IEC 61032-Probe 43-Figure 17 Jusdtest
- IEC61032-Probe 41-Figure 16 Test probe 41
- IEC61032-Probe 32-Figure 15 Test probe 32
- Test probe 31 IEC61032-Probe 31-Figure 14
- Jointed Child Finger Probes IEC 61032-Probe 19-Figure 13 R 2.5±0.05 mm
- Test probe 18 of IEC 61032 R4.3mm Jointed Child Finger Probes
- Digital recorder for Lugeon testing
- MRU Subsea maring motion reference unit
- MRU maring motion reference unit
- eMRU motion reference unit
Popular Searches
Recommended Products
- ASTM D2602 Full Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester (16 test units)
- ASTM D1551 Sulfur Content of Petroleum Products Tester (Tubular Furnace Method)
- ASTM D5182 FZG Gear Oil Wear Testing Machine
- ASTM D1534 Auto Acid Number in Transformer and Turbine Oils in Service by BTB Method
- High Quality DIN Abrasion Tester Sole Rubber Abrasion Test Machine Sole Wear Testing Equipment
- DIN-53516 Shoes DIN Abrasion Tester Rubber Abrasion Resistance Test Machine DIN Wear Testing Equipment
- DOPPEL new arrival DPLLD series plug-in electromagnetic flowmeter DN10-DN3000 0.6MPa 1.0MPa 1.6MPa 4.0MPa
- ASTM D5264 Ink Rub Abrasion Tester Ink Rub Resistance Test Machine Paper Friction Testing Equipment
- JY-1035 Ink Rub Resistance Tester Ink Decolorizing Test Machine Ink Printing Abrasion Test Equipment
- Portable Textile Moisture Meter KMS680T
- High Precision Dichroic Optical Glass Prism, Right Angle Beam Splitter Lens
- Optical glass custom 90 degree silicon quartz right angle prism
Find Similar Products By Category
- Measurement & Analysis Instruments > Other Measuring & Analysing Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Qing Tian
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-