Analog output CO transmitter

Name: Analog output CO transmitter
Brand: TONGDY
Price: Negotiable

FOB Price

Negotiable / Piece

10 Pieces(Min.Order)

Product Details

Place of Origin:	Beijing, China	Brand Name:	TONGDY	Model Number:	F2000TSM-CO
Usage:	Auto

1.Carbon Monoxide Transmitter with analog output
2. 0~10V/4~20mA optional
3. RS485 communication

CO Measurement
Gas detected	Carbon monoxide
Sensing element	Battery operable electrochemical sensor
Gas sample mode	Diffusion
Warm up time	1hour (first time)
Response Time	Within 60 seconds
Signal Update	1s
CO Measuring Range	0~100ppm(default) 0~200ppm/0~500ppm selectable
Accuracy	<±1ppm (at 20±5°C/ 50±20%RH)
Stability	±5% (over 900 days)
Electrical
Power Supply	24VAC/VDC
Consumption	1.5 W
Wiring connections	5 terminal blocks (max.)
Outputs
Linear analog output	1x0~10VDC/4~20Ma selectable in order
D/A resolution	16 bit
D/A conversion accuracy	0.1ppm
Modbus RS485 Communication interface	Modbus RS485 interface 9600/14400/19200(default), 28800 bps, 38400 bps (programmable selection), 15KV antistatic protection
General Performance
Operation temperature	0~60°C(32~140°F)
Operation humidity	5~99%RH, non condensing
Storage conditions	0~50°C(32~122°F)
Net Weight	190g
Dimensions	100mm×80mm×28mm
Installation standard	65mm×65mm or 2”×4” junking box
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30
Compliance	EMC Directive 89/336/EEC

1) Wall mounting, real time detect CO level with measuring range of 0~100ppm/ 0~200pm/ 0~500ppm.

2) Electrochemical sensor which offer several advantages over traditional electrochemical sensors.

3) With a long life, good long term stability, and high accuracy, the CO sensor is environmentally friendly

without risk of electrolyte leakage.

4) With simple calibration

5) The special design of easy sensor’s replacement makes customers replace sensor easily by

themselves

6) Full time CO level detection, even the slightest leak can be detected

7) One analog output of the measurement of carbon monoxide concentration with 0~10V/4~20mA selectable

8) Special built-in Self-Zero Correction algorithm.

9) Modbus RS-485 communication with 15KV antistatic protection, also can be calibrated carbon monoxide

measurement via the interface

Tongdy Sensing Technology Corporation (Beijing): Contact nameQing Tian; Phone86-10-59738930-8075; AddressBuilding 8, Courtyard 9, Dijin Rd.

Product Categories

Hygrostat with Temperature Detection	Temperature and humidity transmitter	Temperature and humidity controller	Particle Matter Indicator
Ozone Detector/Controller	New Products	NDIR CO2 Monitor/Alarm	NDIR CO2 Controller
IAQ Detector/Controller	BacNet Thermostat	Digital Thermostat for VAV Terminal	Digital Thermostat for Floor Heating and boiler
Digital Thermostat for AC unit/DC System	Digital FCU Thermostat	CO2 Controller for Greenhouse	CO Transmitter
CO Monitor/Controller

New Products