Contact Platform Support
Help CenterHigh Quality Boron Carbide Short Nozzles, Sandblasting Nozzles
Related Products
-
Milling Cutters for General Scarification From ZzbetterUS$ 1.38 - 2.5MOQ: 5 Kilograms -
Tungsten Carbide Milling Cutters Used for Cold Plastic Coatings RemovalUS$ 1.38 - 2.5MOQ: 5 Kilograms
-
Scarifying Milling Cutters Utilized for Thermoplastic RemovalUS$ 1.38 - 2.5MOQ: 5 Kilograms
-
Scarifying Milling Cutters Utilized for Waterproofing Membrane RemovalUS$ 1.38 - 2.5MOQ: 5 Kilograms
-
Milling Scarifier for Removing Thick and Soft MaterialsUS$ 1.38 - 2.5MOQ: 5 Kilograms
Small Abrasivr Blast Boron Carbide Nozzle Insert
The hardness of boron carbide is only secondary to diamond and Cubic BN. The density of the boron carbide products produced by us is close to its academic density (2.52g/cm3).
Advantages of our boron carbide nozzle:
High hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.
Application: can be used on sandblasting machine to clean rust
Estimated Service Life of Nozzles (In hours)
Nozzle Material |
Steel Grit/Shot |
Silica Sand |
Brown Aluminium Oxide |
Alumina |
20-40 |
10-30 |
1-4 |
Tungsten Carbide |
500-800 |
300-400 |
20-40 |
Silicon Carbide |
600-1000 |
400-600 |
50-100 |
Boron Carbide |
2000-2500 |
1000-1500 |
500-1000 |
The service life of Boron Carbide Nozzle is THREE TIMES as Silicon Carbide Nozzles’.
Vera Dong (Sales Dept.)
Mob: +86 15673396866 (whatsapp)
Skype: zzbetter7 QQ: 2355304622
Zhuzhou Better Tungsten Carbide Co., Limited
Address: No. 388, Huanghe North Road, Tianyuan District, Zhuzhou City, Hunan, China
Tel: +86-731-28705418 Fax:+86-731-28510897
Don't hesitate, try our products, you will win the market!
Send Inquiry to This Supplier
You May Also Like
-
Carbon Fiber Used for the Sewage and Water TreatmentNegotiableMOQ: 10 Kilograms
-
Wodon Chromium Carbide Hardened Wear Components With Super Wear ResistanceCHF 300 - 300MOQ: 1 Square Meter
-
Corrosion Resistant Rarlonsteel Zinc-Aluminum-Magnesium Hc260yd+Zm Coil for HVAC Automotive Industrial ApplicationsUS$ 800 - 3000MOQ: 1 Ton
-
Brass Coated Steel Cord for Making Tyre 2*0.30mm Belt/ Steel Conveyor Belt Steel Cord /Tear-Resistant Dipped Steel Cord Fabric for Conveyor BeltUS$ 1 - 200MOQ: 10 Kilometers
-
O-type Fisheye Perforated Corrosion-resistant Alligator Mouth Anti-slip Welded Plate Grip Bracket Grid, Suitable for Outdoor WalkwaysUS$ 20 - 100MOQ: 1 Piece
-
Aluminium Foil /Lamination FoilUS$ 2,900 - 3,600MOQ: 20 Tons
-
GrilleNegotiableMOQ: 50 Pieces
-
Tungsten Heavy AlloyUS$ 1 - 1,000MOQ: 5 Kilograms
-
Nodulizer Re Fesimg Alloy From Anyang FactoryUS$ 1,230 - 2,000MOQ: 20 Tons
-
Model NO.SY2003-2 Drain Siphon (Desague Sifon)US$ 8 - 10MOQ: 1 Piece
