Contact Platform Support
Help CenterPDC Bit
Related Products
Specifications
PDC bit is mainly used for drilling soft,medium formation,and it work under low drilling pressure,mid-low speed and big drainageINTRODUCTION
PDC bit uses PDCS as main cutting components, with the excellent wear-ability and impact toughness of the PDC.
PDC bit is mainly used for drilling soft,medium formation,and it work under low drilling pressure,mid-low speed and big drainage
Henan zhongmei can supply all kinds of PDC Coring and non-coring bits, PDC sintering matrix bits and PDC anchoring bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway.
We also can design PDC bits according to customer requirements, such as different geological condition, special strata and so on.
Theory
PDC(polycrystalline diamond compact) drill bit is a new product after the hot-pressed and electroplated drill bit recent years.With special hith-frequency weldin techniques.PDC of high wear resistant si welded to the body as cutting edges.PDC bit is mainly used for geological prospecting,coal exploration,water conservancy and power engineering,etc.
Features
1. It has a super long life. The grinding/consumption ratio of PDC is 2040 times that of tungsten carbide bit and 10 times that of diamond bit.
2. It had high drilling speed.
3. It can be operated with low pressure and low speed.
4. It has a good gage protection.
5. It can be used widely, more suitable for drilling in the stratum with formation<7
6. It has a low cost
PDC Coring bit
PDC Coring bit is a kind of pipe-shaped bit with PDC cutters which can get the coring. It is mainly used for peological exploration, coal mining, water canservancy and hydropower, road construction, railway, bridge and building.
|
Specifications Diameter(mm) |
Size |
Cutting Wings |
Screw |
Rock formation |
|||
Outer Dia(mm) |
Inner Dia(mm) |
Height(mm) |
Wing Quantity |
PDC Quantity |
|||
75 |
75 |
53 |
150 |
5/6 |
5/6 |
Square |
F<7medium hard( Soft rock, coal seam drilling and grouting) |
94 |
94 |
69 |
170 |
6/8 |
6/8 |
||
113 |
113 |
88 |
195 |
8/10 |
8/10 |
||
133 |
133 |
108 |
220 |
10/12 |
10/12 |
||
153 |
153 |
128 |
245 |
12 |
12 |
||
PDC Non-coring bit
PDC Non-coring bit is a kind of full face bit, it is mainly used for coal mining, water canservancy and hydropower, road construction, railway, bridge and building.
|
Specification diameter(mm) |
Size |
Cutting Wings |
Water Hole |
Threading |
Rock Formation |
|||
Dia(mm) |
Height(mm) |
Pillar Quantity |
Blade Quantity |
Quantity |
Quantity |
|||
56 |
56 |
115 |
2 |
3 |
4 |
6--8 |
Square Taper Lock |
F<7 medium hard (Dagstone; sandstone; Limestone) |
60 |
60 |
115 |
2 |
3 |
4 |
6--8 |
||
65 |
65 |
115 |
2 |
3 |
4--5 |
6--8 |
||
75 |
75 |
125 |
2 |
3--4 |
4--6 |
6--10 |
||
78 |
78 |
128 |
2 |
3--4 |
4--6 |
6--10 |
||
85 |
85 |
128 |
2 |
3--4 |
4--6 |
8--12 |
||
94 |
94 |
128 |
2 |
3--4 |
4--8 |
8--12 |
||
113 |
113 |
135 |
3 |
3--4 |
6--8 |
8--12 |
||
133 |
133 |
135 |
3 |
3--4 |
6--8 |
8--12 |
||
PDC Anchor bit
Application: Apply to the anchor-network support hole drilling in coal mine, transportation, hydropower, and so on.
Characteristics: high wear resistance and impact-resistant toughness; long drilling life,, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation; laber intensity can be reduced
Colliery Drilling Tools |
Main Standard(mm) |
|||
D |
H |
L |
M |
|
|
Thread joint |
27 |
44 |
17 |
M14×1.5 |
27 |
54 |
17 |
M12×1.75 |
|
28 |
54 |
20 |
M12×1.75 |
|
29 |
52 |
18 |
M14×1.5 |
|
30 |
50 |
18 |
M14×1.5 |
|
32 |
52 |
22 |
M14×1.5 |
|
32 |
56 |
22 |
M12×1.75 |
|
Send Inquiry to This Supplier
You May Also Like
-
Industrial Grade Spur Gear Shaft - 20CrMnTi MaterialNegotiableMOQ: 1 Unit -
ASTM G65 Wear Resistant Liner Bimetal Alloy Steel Overlay PlateUS$ 299.69 - 299.69MOQ: 1 Square Meter
-
Drilling Equipments Drilling Fluids Vacuum DegasserNegotiableMOQ: 1 Set
-
Good Quality Tungsten Carbide Button InsertsUS$ 1 - 5MOQ: 100 Pieces
-
Airless Truck Tire Solid Vehicle Tire 17.5-25 20.5-25 for Mining Machine PartsUS$ 16 - 200MOQ: 1 Piece
-
Ball Mill Plant Used Automatic Feeding Electromagnetic Vibrating FeederUS$ 650 - 800MOQ: 1 Set
-
API 16A Cameron/shaffer Type Single Ram BOP Manual for Oilfield DrillingUS$ 100000.00 - 100000.00MOQ: 1 Set
-
High QualityBearing Seat Sodium Ductile Iron Pipe Clampsductile Iron CastingUS$ 0.8 - 1.3MOQ: 1 Metric Ton
-
Silicon Bouncing Ball for Vibro SifterUS$ 0.5 - 0.8MOQ: 200 Pieces
-
Wear Resistant Jaw Crusher Toggle Plate Whatsapp008615290435825US$ 1 - 500MOQ: 100 Pieces
