Contact Platform Support
Help Center
Related Products
K108 GPS board
Signal Tracking | |
Channel | 198 Channels |
GPS | L1,L2,L5 |
BeiDou | B1, B2,B3 |
GLONASS | L1,L2 |
SBAS | WAAS, EGNOS, MSAS |
Cold Start | < 50s |
Warm Start | < 30s |
Hot Start | < 15s |
Signal Reacquisition | < 2s |
Positioning Specifications | |
Pseudo Range Accuracy | L1=10cm/L2 =10cm/L5=10cm, B1=10cm/B2=10cm/B3=10cm |
Carrier Phase Accuracy | L1=0.5mm/L2=1mmL5=0.5mm, B1=0.5mm/B2=0.5mm/B3=0.5mm |
Standalone Position Accuracy | < 1.5m |
Real Time Kinematics (RTK) | Horizontal: 10 mm + 1 ppm RMS |
| Vertical: 20 mm + 1 ppm RMS |
Initialization Time | Typically < 10s |
Initialization Reliability | Typically > 99.9% |
Post Processing Static | Horizontal: 2.5 mm + 1 ppm RMS |
| Vertical: 5 mm + 1 ppm RMS |
Velocity Accuracy | 0.03 m/s |
Acceleration | 4g |
Overload | 15g |
Time Precision | |
GPS | 20 ns |
BeiDou | 30ns |
GLONASS | 20ns |
GPS + BeiDou | 20 ns |
Communications | |
RS232 | 3 LV-TTL Ports, Baud rates up to 921,600 bps |
Positioning Data Outputs | 1 Hz, 5 Hz & 10 Hz (depends on installed option) |
Raw Data Outputs | 1 Hz, 5 Hz, 10Hz & 20 Hz |
PPS | 1 Pulse Per Second Output |
Indicating Light | 3 LED Indicating light |
| Indicating Power, Satellite Tracking and Differential Data |
Data Format | |
Correction Data I/O | RTCM 2.1, 2.2, 2.3, 3.0, 3.1, CMR(GPS only),CMR+(GPS only) |
Position Data Outputs | ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, |
| VTG, GST, PJK, PTNL |
| Extended NMEA-0183 BDGGA, GPNTR, GPCDT, GPHPR |
| Binary (compatible with major brands) |
Phisical | |
Size (L x W x H) | 100mm x 60mm x 12mm |
I/O Interface | 44-pin Double Male Header |
Weight | 40g |
Antenna | 1 x MCX Receptacle (10 MHZ) |
Environmental | |
Working Temperature | -40°C to +85°C |
Storage Temperature | -55°C to +95°C |
Humidity | 95% Non-Condensation |
Electric | |
Input Voltage | 3.3-6V DC |
Power Consumption | 1.8W |
Memory | 100MB |
1.GPS L1/L2/L5+BeiDou B1/B2/B3+GLONASS L1/L2 dual satellite system calculating.
2.Configurable GPS/BeiDou/GLONASS single system positioning and dual system positioning.
3.Compatible with other major brands on physical size, interface and data command.
4.Directly export PJK coordinate.
5.Support short, middle and long base line, RTK working distance can reach 50KM.
6.Easy to customize, can satisfy different kind of demands.
7.Built in 100M internal memory.
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Laser Shaft Alignment Tool Heat Press Laser AlignmentNegotiableMOQ: 100 Pieces
-
Ultrasonic Flaw Detector ASTM E317 EN 12668 Ultrasonic Flaw Detector NDT EquipmentUS$ 3500 - 4000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Shaft Alignment Tool SKF TKSA 31 Laser Alignment Tool Shaft AlignmentNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Basic Wired Laser Shaft Alignment ToolNegotiableMOQ: 100 Pieces
-
High Quality Shaft Alignment Tool Tksa31 With Good Price, Laser Alignment, Tksa SeriesNegotiableMOQ: 100 Pieces
-
Shaft Alignment Tool TKSA 51 Large Sized Detectors and Powerful Lasers,quickly Check and Correct Shaft Alignments,very Easy to UseNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Laser Axis Intermediate Tool Easy-to-Use Touch Screen Quick Customization OEM Support Test Instruments ProductNegotiableMOQ: 100 Pieces
-
TKSA 51 Shaft Laser Aligner Alignment Tool High Quality With Good PriceNegotiableMOQ: 100 Pieces
