Small Autoclave for Hydrothermal Synthesis Reactor

Brief introduction

Hydrothermal synthesis reactor is also called high pressure digestion tank, pressure dissolved shells which is finished by high quality stainless steel and PTFE. It with simple appearance, reasonable structure, while acid, alkali and corrosion are all resistance. Hydrothermal synthesis reactor is achieve the goal of rapid digestion of insoluble material by strong acid or alkali and high temperature and high pressure sealed environment in the tank. It is the right hand in sample digestion when it determined the trace elements and trace elements.

Use and precautions

1. The heating should not exceed 200 ℃, heating rate ≤ 55 ℃ min, PID temperature control system can be used to control the temperature, cooling rate ≤ 5 ℃ min, safety pressure is 3 Mpa.

2. When you completed the reaction, please open the kettle cover until the kettle natural cooling to the room temperature.

3. The degree of filling in kettle should no more than 80%.

Note: When heated to 100 degrees, please keep for 1 hour and then heated to the desired temperature, to ensure the longevity and safety of the equipment.

Technical data

Liner temperature

Product details

1. ZZKD Instruments provides one year warranty for the products described here.
2. The warranty covers part and manufacturing defects. In the case of a part or manufacturing defect, the device shall be repaired or replaced free of charge under the terms of the warranty.
3. Beyond the warranty period, product problems can also be solved by our company, but charge component cost and maintenance cost properly.
4. ZZKD Instruments shall not assume liability for any damages incurred as a result of improper handling.
5. If you encounter problems when using our products, please contact us by telephone or e-mail, we will be ready to provide consulting, maintenance and other services immediately.

1. What’s the material of the shell?

Usually 304 stainless steel

316 stainless steel is available.

2. What’s the delivery time?

In stock for normal models.

3. How many kinds of your reactor?

Max 240 degree C liner and Max 280 degree C liner.

4. Note

When heated to 100 degrees, hold for 1 hour and then heated to the required temperature to make sure the long life and safe use.