Professional Iron Kiln in Cement Making Machinery

Professional Iron Kiln in Cement Making Machinery

Application

Iron kiln is a device that supplies tremendous amounts of heat in order to change the chemical composition of an object. It is made up of a strong reinforced steel outer shell that is coated with a heat-resistant inner lining, support rollers and a drive gear to keep the contents in a continuous rotating motion and internal heat exchangers capable of producing temperatures well over 2732 degrees Fahrenheit (1500 degrees Celsius).Iron kiln will sit slightly at an angle so that the inner contents will be sifted downwards toward the heat source and allow for any evaporative gasses to escape from the top during the process through sealed ductwork. The contents are then sorted and ejected through an opening in the lower end of the device that automatically sorts processed materials and waste into separate bins. Other common terms to describe such a device may be a rotary kiln incinerator or a rotary kiln dryer.

Perhaps one of the most common uses for this technology is the creation of iron kiln, which grinds limestone, clay, and shale down to small bits of rock and transforms them into a usable cement mixture that is ready to be either packaged or immediately used. During this process, the materials are exposed to varying temperatures that will evaporate any water present and transform the limestone and clay back to their original oxide states. As the internal heat increases up to 2642 degrees F (1450 degrees C), the rocks that were transformed into belite and calcium oxide melt together to form the composition alite. Due to the extreme heat associated with this process, the resulting lumps of alite are no larger than 0.39 inches (10 mm) across and are easily handled once the cooling process is completed.

 The allows for many similar types of solids to be broken down into more readily usable materials, and it is commonly used on alumina, titanium dioxide and lime. Metakaolin, iron ore pellets, and many other metallic and non-metallic components may also be broken down by a iron kiln. Refractory material, or a solid whose composition does not possess metal, but still remains suitable for construction, iron kiln is also created using this method and ultimately installed iron kiln and other furnaces as an insulator to protect the outer shells from the extreme internal temperatures. 

Flowchart of Iron Kiln

Custom Worksite of Iron Kiln 

Drawing of Iron Kiln

Specification Sheet for Iron Kiln

 1.  Pre-sale services:

Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.

1>. Select equipment model;  

2>. Design and manufacture products according to clients' special requirement;

3>. Train technical personnel for clients. 

2.  Services during the sale:

Respect clients, devote ourselves to improving the total value of clients.  

1>. Pre-check and accept products ahead of delivery;  

2>. Help clients to draft solving plans.  

3.  After-sale services:

Provide considerate services to minimize clients' worries.  

1>. Assist clients to prepare for the first construction scheme;  

2>. Install and debug the equipment;  

3>. Train the first-line operators;

4>. Examine the equipment;

5>. Take initiative to eliminate the troubles rapidly;

6>. Provide perfect service;

7>. Provide technical exchanges.

Established  in 2004, Derui Machinery Co.,Ltd is specialised in making iron kiln for 13 years, enjoying high reputation in international and domestic markets. 

As a leading manufacture of iron kiln, our brand is is your first choice.

Welcome to visits our factory!

 In order to give you a professional reply, please confirm the following information first:

1. What is the raw material?

2. What is the size of raw material?

3. What is the initial moisture content of raw material?

4. What is the moisture content you expect to get?

This piece of message is from Alibaba.