Grinding Mill Gold Roller Pan Mill Machinery Edge Runner Milling Machine for Small Alluvial Gold Mine

Grinding Mill Gold Roller Pan Mill Machinery Edge Runner Milling Machine for Small Alluvial Gold Mine

Brief Introduction of Grinding Mill Gold Roller Pan Mill Machinery

The two roller wet pan mill is also called wet grinding machine. Based on the different structure, it is divided into double roller grinding and three roller grinding. It is widely used for selecting ferrous metals,nonferrous metals and nonmetals, as well as precious metals like gold and silver.  

Main Advantages of Grinding Mill Gold Roller Pan Mill Machinery

It is praised by users because if it has the features of low investment,high production capacity,low consumption, good efficiency, easy installation and maintenance. It is the excellent equipment which can instead of ball mill. It isthe perfect equipment for medium sized and small enterprises. The wet grinding mill is mainly used for separating gold, silver, lead, zinc, iron, molybdenum, copper, antimony and so on. 

Working Principle of Grinding Mill Gold Roller Pan Mill Machinery

The machine repeatly squeeze and mill gold ore through the weight of the wheels until the gold ore has been crushed completely. And then and 1kg mercury into the water. At the same time, every 5-10 minutes, add gold ore to the machine. After 24 hours,recycle the mercury. Then pack mercury with big density of cloth. Twist the cloth and let the mercury come out. The gold will be left in the cloth. 

Main Structure and Features of Grinding Mill Gold Roller Pan Mill Machinery

Technical Parameters of Grinding Mill Gold Roller Pan Mill Machinery

1. operator should be trained qualified by manufacturers, fully understand the device structure and performance, then can take up his quarters to operate the machine. The operator should comply with the relevant safety, shift system.
2. before working, in strict accordance with the provisions add oil and maintain the proper fuel, oil line is smooth, oiling mouth is clean.
3. Check the circuit, electrical parts, wiring connectors, whether switch is securely intact. If damaged, must repair and replacement.
4. Check that whether the various parts of the machine is intact, whether the runner wheel is flexible, drive belt's degree of tightness, whether transmission parts are securely connected; after checking, boot idling for 3-5 minutes to ensure every part normal, then add ore and should be in strict accordance with specified amount, it is strictly prohibited to work overload.
5. when feeding, materials should be sieved to prevent iron ore and other hard metal debris into the mill and damage the machine.
6. when shut down for any reason, first remove the materials in the grinding pan, then restart, strictly prohibit to forced start.
7. when the device is operating, operators shall not leave, should make an inspection tour for every part working condition. If the device send out abnormal sound, runner wheel large amplitude vibration, reducer oil temperature is too high, motor's enclosure is overheating, drive belt skid, should immediately stop and dispose.
8. in shutdown process, when the grinding wheel is s not completely stopped, forbid arms and other devices into the grinding basin, prevent to hurt people, damage to the machine.
9. pelple wnter into the grinding basin to repair, in addition to disconnect power switch, put up warning sign with "someone  overhaul, not allow switch on", and set the specialist care to avoid touching.
10. after maintenance, should examine, sweep the device, remove sundries, and every switch set neutral position, then open power switch.
11. during usage, should comply with maintenance principle of regular maintenance every day, seven days little maintenance, monthly maintenance, to make the machine safety and efficient production.