10-200ton per Day Corn Oil Processing

Our Factory                                                                                

Our advantages of 10-200ton per day corn oil processing            

More than 30 years including 5 years overseas market  experience of designing

and installing complete automatic oil press machine , we are now a leading 

company in automatic oil press machine field . 

We supply various automatic oil press machine and connected equipments

(1) High oil yield , obvious economic benefit .

(2) Lower residual oil rate in the dry meal .

(3) Improving the quality of the meal .

(4) Low processing cost , high productivity.

(5) Saving energy,saving labor.

Our services about 10-200ton per day corn oil processing         

1.Ensure providing complete equipment and its accessories on time.

2.Ensure the installation and adjustment are once accepted.

3.Ensure providing high-quality equipments with competitive price.

4.Providing new products and advanced technology preferentially;

5.Providing the operating technicians professional training to ensure operate 

   independently.

6.Appointing you a inspector during the installation process.

7.Arranging an professional installation team which will be managed by our PM.

Processing line of 10-200ton per day corn oil processing          

1. Flowchart of 10-200ton per day corn oil processing:

Metering →Cleaning →Magnetic separation→Destoner→Crushing  →Softening  →Flaking  

→Cooking →Pre-pressing  →go to extraction section

                             ↓                       

                   Second oil press    

2.Pretreatment process of 10-200ton per day corn oil processing:

a. Cleaning device:  To remove various impurities in oilseeds, such as: iron,

stones, clump, such as the plant leaf, clean up till impurity content does not

exceed 0.2%.

b. Crushing machine:  Oilseeds are crushed into 6-8 pieces. In order to meet the 

requirements of crushing, the peanut is suitable for crushing with the moisture of

7% to 12%.

c. Softening Process:  The purpose of softening is to adjust the moisture and

temperature of oil, and make it soft.

d. Flaking process:  Rolling raw material into flakes, and the purpose is to

increase surface area, destroy the peanut cell tissue, shorten the way of oil

out from cake.

e: Cooking process:  Use steam cooking, inject direct steam and cook the flakes to

meet the requirement of oil press.

f. Pre-press:  Press the flakes to leave about 16%-18% in the cake. The cake

will go to extraction process.

g. Second oil press: Press the cake till the oil residue is about 5%.

3. Consumption in Operation :

Strength of factory                                                                   

Customer visiting                                                                     

FAQ                                                                                            

More information ,pls contact as follows: