Used Rubber Tyre Recycle plant/Waste Tyre Recycling Plant/ waste tire recycling machine to rubber powder

Waste tire recycling to rubber powder production line for recycle use

♥ Why we developed the rubber powder production line?

With the rapid development of the world automobile industry and transportation industry, the demand of all kinds of tires are increasing day by day. At present, more than billions of tires are sold all over the world every year. According to the research, 50-55% raw rubber are used for the tire manufacturing every year. For security, automobiles should change tires after every 30,000-50,000 km trip distance. In this way, billions of waste tires, about 17 millions tons can be produced in one year. And waste tires is a kind of non-fusible or refractory polymer elastomer materisl, which will take hundreds of years to decompose. With the time goes, the waste tire problem has become serious to environment. How to dispose the waste tires also become more and more important in every countries.

Because of this, except the tire pyrolysis machine, the rubber powder production line is another new develop and design equipment used for recycling waste tires to rubber pwder for recycle use.

♥ What's rubber powder production line?

Rubber powder production line is used for processing used tires and rubbers to fine rubber powders. Not only this, the rubber powder equipment can separate the three major raw materials contained in tires: rubber, steel wire and fiber once for all. Then through the rubber reducer can restore the used tires and rubbers to the conditon before vulcanization, which can be used for making all kids of rubber products, so as to achieve the waste recycling.

♥ What kind of rubber pwder production line we can provide?

To better meet customers' demand, we supply two kinds of rubber powder production line. One is semi-automatical rubber powder production line. And the other one is fully-automatical rubber powder production line.

♦ Semi-automatica rubber powder production line:

Semi-automatical rubber powder production line mainly consist of five parts: tire ring cutter, tire strip cutter, steel wire separator, tire block cutter and rubber powder production equipment.

(1) Tire ring cutter is used for cutting the tire steel wire circle (two tire sidewalls) from tire body for further processing;

(2) Tire strip cutter is used for cutting the tire body to tire strips for tire block cutter;

(3) Tire steel wire separator is used for separating the steel wire from the tire sidewalls;

(4) tire block cutter is used for cutting the tire strips to tire blocks ( 3 - 5cm sizes);

(5) Rubber powder production equipment is the last step to process the tire blocks to rubber powder.

And we have different standards of rubber powder processing equipments can process the rubber powder into different sizes (meshes) for different uses.

♦ Fully-automatical rubber powder production line:

Fully-automatical rubber powder production line mainly consist of only three parts: Steel wire drawing machine, Tire shredder and rubber powder production equipment.

(1) Steel wire drawing machine, which is used for pulling out the steel wire from tires automatically.

(2) Tire shredder is another kind of tire cutting machine, but the biggest advantage of it is it can directly process the whole tires or big tire blocks into small pieces (usually 3 - 5cm sizes) for rubber powder processing line;

(3) Rubber powder production equipment is the last step to process the tire blocks to rubber powder.

And we have different standards of rubber powder processing equipments can process the rubber powder into different sizes (meshes) for different uses.

♥ What services can we DOING Company provide?

♦ Pre-sale Service

(1) According to the customers' special requirements, provide the most suitable project design, process design and the purchase program.

(2) Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.

♦ On sale service

(1) Welcome you to our factory for a visiting;

(2) Accompany you to check our machine production, quality and  the working conditions.

(3) Customize the equipments strictly according to your special requirements and arrange the timely delivery.

♦ After-sale service

(1) Installation guidance

When the machine arrives at your company, we will dispatch our technicians to your factory to guide the installation and commissioning at site.

(2) Technical training

We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.

(3) Warranty

Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the  life-long follow-up service.

♥ How about DOING Company?

We DOING Company as a leading manufacturer in China has specialized in the recycling machinery and other supporting equipments for about 10 years, 5 years experience for domestic market, and 5 years for foreign trading. We  have developed and designed many kinds of used tyre processing machines and pyrolysis products processing equipments, such as tyre pyrolysis machine for recycling waste tyres to fuel oil and some supporting tyre pre-treatment equipments, like tyre cutting machine, tyre auto-feeder, and pyrolysis oil refining machine, carbon black processing machine etc. Except the best services and best machine quality, we can make you feel our profession everywhere.

Through our constantly improved technology and services, we DOING Company has been accepted widely.

By now we have installed our machines in more than 30 countries:

Africa: Nigeria, Congo, Egypt, Uganda;
Europe: Romania, Poland, Italy, Macedonia, Albania, Turkey;
Asia: Malaysia, Pakistan, India, Thailand, Iran, Bangladesh, Lebanon, Jordan;
America: Mexico, Ecuador, Haiti, Guatamala, Aruba, Panama, Jamaica, etc.

♥ Where can you find us?

Our office is in Zhengzhou City, Henan Province, which is in the middle of China and famous for manufactoring all kinds of machinery. From Zhengzhou International Airport to our office just need 30 minutes. Welcome you to our factory for a visiting!