Pen Type Waterproof Conductivity Tester/Conductivity Meter/pen Type Conductivity Meter/lab Conductivity Meter/POCKET CONDUCTIVIT
POCKET CONDUCTIVITY TESTER
KCSCAN series waterproof pocket conductivity/oC tester are used to measure electrical conductivity and temperature value.
Conductivity Meter pen type conductivity meter/lab conductivity meter/digital electric conductivity meter / portable conductivity meter
Single Point Push-Button Calibration:
KCSCAN series with single point calibration function. The meter is permitted to use standard conductivity solution, you need only set conductivity value of the calibration solution at 25oC and immerse conductivity electrode into conductivity solution, then press [ CAL ] key, the meter will be calibrated automatically.
Hold Function:
When measure the sample solution, you need freeze reading temporarily for ease of recording. Waiting for a stable reading, press [ HOLD ] key, then the meter will hold the value.
Replaceable Electrode:
KCSCAN series with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily.
Automatic Temperature Compensation:
KCSCAN series with temperature sensor, you can view temperature through [oC ] key. The meter with automatic temperature compensation for accurate reading under changing conditions.
Auto-Power Off:
The meter will turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use.
Waterproof Function:
The meter with good waterproof performance, It can float when sink in water.
| Model | KCSCAN20 | KCSCAN30 | KCSCAN40 |
| Conductivity Range | 0.0~199.9uS/cm | 0~1999uS/cm | 0.00~19.99mS/cm |
| Conductivity Accuracy | ±1% F.S | ±1% F.S | ±1% F.S |
| Resolution | 0.1uS/cm | 1uS/cm | 0.01mS/cm |
| Temperature Range | 0~80oC | ||
| Temperature Accuracy | ±1oC | ||
| Temperature Compensation | 0~50oC, Automatic | ||
| Calibration Points | 2 Points | ||
| Calibration Solutions | 146.6uS/cm | 1408uS/cm | 12.85mS/cm |
| Temperature Coefficient | 2%/oC | ||
| Auto-Off | 8 minutes after last key pressed | ||
| Operating Temperature | 0~60oC | ||
| Power Requirements | 3×1.5V alkaline button cell batteries | ||
| Battery Life | Approx. 150 hours of continuous use | ||
| Dimensions | 180(L)mm×30(Dia.)mm | ||
| Weight | 85g | ||

Send Inquiry to This Supplier
You May Also Like
-
Double Salt Bridge SZ 245 ORP Electrode for Wastewater Treatment ApplicationsNegotiableMOQ: 100 Pieces
-
Multi Functional Four in One Water Quality Testing PenUS$ 11.4 - 12MOQ: 50 Pieces
-
Factory Price Measurement Meter Oil Conductivity MeterUS$ 800 - 1,200MOQ: 1 Piece
-
PH Meter PHS-8B Online Digital Waste Water PH MeterUS$ 258 - 550MOQ: 1 Set
-
New PH-009 IA Pen Type Digital pH Meter Digital Tester Hydro Soil PH Meter Blood PH MeterUS$ 1 - 100MOQ: 100 Pieces
-
Digital PH MeterNegotiableMOQ: 100 Pieces
-
Adhesive Water Checker / Moisture Detection / Single UseUS$ 10 - 20MOQ: 40 Cases
-
Digital Soil ph MetersUS$ 30 - 80MOQ: 5 Pieces
-
SELON510 LAB BENCHTOP PH METERUS$ 565 - 619MOQ: 1 Piece
-
MT - 8080 Electric Conductivity MeterNegotiableMOQ: 50 Pieces






