Home > Consumer Electronics > Water Heater & Components > Electric Water Heater > Super Thin 75mm Heatray Electric Heater

Super Thin 75mm Heatray Electric Heater

Super Thin 75mm Heatray Electric Heater photo-1
US$ 240 - 260 MOQ: 50 Sets
Key Specifications
Get Latest Price
Electric Heater Type:
Infrared Heater
Infrared Heater Type:
Other, electric
Heating Element:
Carbon Fiber
Payment & Shipping
Payment Methods:
Port of Shipment:
Dalian
Delivery Detail:
Delivery time depends on order quantity.
Electric Heater Type Infrared Heater
Infrared Heater Type Other, electric
Heating Element Carbon Fiber
Installation Ceiling, Wall Mounted
Certification CE
Function Adjustable Thermostat, Overheat Protection, Remote Controlled
Use Bedroom, Garden, Living Room, Other
Place of Origin Liaoning, China
Brand Name Puyang
Model Number PF-NR08-11A

Specifications

Super thin 75mm Heatray Electric Heater
1.Power 800W
2.Heating area:6-8M2
3.Delivery: on stock
4.Sample is available

Super thin 75mm Heatray Electric Heater  

 

Electric radiant heaters are the most cost effective means of heating larger spaces.  Savings of up to 30% can be made when compared to conventional convection based heating systems. Radiant heaters heat people, not the surrounding air. The radiated heat "naturally" migrates to where it is most needed, which facilitates the creation of a comfortable indoor climate.

 

Radiant Heater is directly transforming electricity into heat. It provides heat through radiant heat transfer to reduce heat losses. It works like the sun, so avoiding heat-exchange flows that may result in floating dust within the air.

 

1

Model

PF-NR08-11A

2

Output power

800W

3

Electric heater type

Infrared heater

4

Heating element

carbon fiber

5

Outer covering

Cold-rolled plate

6

Surface material

Aluminium alloy

7

Technology

Anodicoxidation

8

Temperature

230-270degree

9

Time

up to 300 degrees in 3minutes

10

Heating area

6-8m2

11

Installation

celling;wall mounted

12

Function

overheat protection;adjustable thermostat

13

Use

living room,bedroom,office,garden,factory, shop and so on

14

Size

860*270*75MM

15

Weight

8KG

16

Package

carton

Super thin 75mm Heatray Electric Heater

 

Installation Instructions – Heat-On FIR Radiant Heating Panels

 

Before installation, you must read this guide for correct installation and use. If you have any questions in relations to installation or use of the product, please contact us.

(1)              Preparation

 

a)        The Heat-On FIR radiant ceiling heating panels are low consumption/wattage heaters designed for either main (central) or subsidiary heating for domestic or commercial heating applications.

b)        The heater is fitted with a short length (350mm) of flexible cable for electrical connection.

 

c)         The heaters should be connected as a fixed installation/hard wired by a licensed electrical person, according to the relevant electrical standards.

 

d)        This appliance does not require to be earthed.

e)        In case of heater fault, the Head Office must be notified immediately, the appliance will then need to be returned to the manufacturer for repair or replacement.

(2)              Installation – Location

 

a)        Heater must not be closer than 300mm to adjacent walls.

 

b)        Heater must not be installed closer than 150mm from light fittings (down lights).

c)         Heater does not require any clearance between the back and any ceiling surface.

d)        The heaters are designed to heat with a minimum ceiling height of 2400mm and a maximum of 5000mm.

e)        When installing multiple panels in one room please ensure that the panels are spaced a minimum distance apart equal to the length of the specified panels.

Super thin 75mm Heatray Electric Heater

 

f)          When installed in wet areas, the heaters must be installed so that switches and other controls cannot be touched by persons in the bath or shower.


 

(3)              Installation – Heaters

 

a)      Clean the ceiling and mark out the fixing points as per the recommended installation location.

 Super thin 75mm Heatray Electric Heater

  

b)      Mount the heating panels by fixing screws into timber or ceiling toggles above plaster to firmly secure the heaters to the ceiling surface. The fixing torque needs to be fairly rigid to prevent any expansion/contraction movements while panels operate.

 Super thin 75mm Heatray Electric Heater

 

 c) Once panels are securely fixed cover the naked holes with the supplied hole plugs.

 Super thin 75mm Heatray Electric Heater

 

d)   Connect the heater wire to the power line of the thermostat.

Super thin 75mm Heatray Electric Heater

 

e)   Connect the thermostat wires as per the thermostat installation instructions.

 Super thin 75mm Heatray Electric Heater

 

f)  When capacity is over 3500watts/14.6 Amps please use a magnetic contactor for switching.

 Super thin 75mm Heatray Electric Heater

 

g)      After installation, set the thermostat temperature to over 25 Degrees C, wait for 90 seconds and than touch each heating panel to make sure they have been correctly installed.

 Super thin 75mm Heatray Electric Heater

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2005
Factory Size
50,000-100,000 square meters
Total Employees
51 - 100 People

Recommended Categories

Explore top categories and find suppliers for your specific needs