Home > Manufacturing & Processing Machinery > Manufacturing Equipment for Electrical & Electronic Product > Cable Extrusion Machine > 1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine

1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine

1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-1
1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-2
1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-3
1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-4
1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-5
1-45mm Automatic Scrap Cable Wire Peeling Machine Copper Wire Stripper Recycling Machine photo-6
US$ 499 - 899 MOQ: 1 Set
Key Specifications
Get Latest Price
Place of Origin:
Zhejiang, China
Brand Name:
BSGH
Model Number:
BS-KOB
Payment & Shipping
Payment Methods:
Port of Shipment:
Ningbo
Delivery Detail:
Delivery time depends on order quantity.
Place of Origin Zhejiang, China
Brand Name BSGH
Model Number BS-KOB
Usage Stripping

 

Product

BS-KOB electrical wire recycling machine suitable for copper wire, single core wire ,multi core wire,aluminum wire.

 

Wire stripping range:1-45mm.

 

This machineis practicable and easy to handle.

 

Specification:

 

Model BS-KOB
Range 1~45MM
Weight 110Kg
Mea 760*640*920
Power 2.2KW
Output 600~1200KG

 

BS-KOB use introduction:

 

1.Push the Switch up to turn the Motor ON, Check whether the machine work well. Make sure there are no people on the output side of the machine. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time.

2.Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.

3.On the output side, if the cuts on the cables/wires are too deep, please check below points:

A.Please adjust the handles on the input side, screw down or loose them. (M12 handles)

B.Check whether the cables/wires on the right position as you feeding them.

C.Make sure the blades are sharp, if not, polish  them with the oil stone.

4.On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not been disgorged, please check below 4 points:

D.Polish the axis of the upper side shaft with the oil stone properly Check whether the springs are loose, if yes, screw down to make them tighten

E.The diameter of the cables/wires are too small, please adjust the space between the two axis to 0.3-0.6mm.

 

F.If the cables/wires you want to strip are hot, also can not get the copper wires stripped out.

 

Products photos:

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

♠BS-KOB composition:

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

   1,Blades adjuster   A:twin-core sheet wire inlet

   2,Wheel adjuster  B:3-4 cores sheet wire inlet

   3,center adjuster   C:Diameter 1.5-3.0mm cables/wires’inlet

   4,Safeguard meshwork D:strip video cables/wires or core loosed wires.

    E:Diameter 3.1-4.5mm cables/wires’ feeding  hole

    F:Diameter 7.0-10.0mm cables/wires’ feeding  hole

    G:Diameter 10.0-13.0mm cables/wires’ feeding  hole

    H: Diameter 13.0-14.0mm cables/wires’ feeding  hole 

    I: Diameter 14.0-16.0mm cables/wires'feeding hole

    J,K:dual core flat wires

    K: Diameter 1.0-3.0mm cables/wire’s feeding hole

    L: Diameter 2.0-6.0mm cables/wires’ feeding  hole

    M: Diameter 3.0-8.0mm cables/wires’ feeding  hole

    N:  Diameter 5.0-10.0mm cables/wires’ feeding  hole

    O: Diameter 6.0-12.0mm cables/wires’ feeding  hole

    P: Diameter 10.0-15.0mm cables/wires’ feeding  hole

    Q: Diameter 12.0-20.0mm cables/wires’ feeding  hole

    R: Diameter 15.0-27.0mm cables/wires’ feeding  hole

    S: Diameter 25.0-33.0mm cables/wires’ feeding  hole

    T: Diameter 30.0-42.0mm cables/wires’ feeding  hole

 

 

 

Related Products
Product Name Model Output Link
Automatic Wire Granulator Machine

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

miniBS-400

100KG/H click here

BS-400

150-200KG/H click here

BS-600

300-400KG/H click here

BS-800

600KG/H click here

 

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

BS-009

200KG/H click here

 

Production Equipment

 1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

Certifications

 1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine

 

Trade Shows

1-45mm automatic scrap cable wire peeling machine copper wire stripper recycling machine 

 

 

 

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Trading Company
Year Established
2013
Factory Size
Below 1,000 square meters
Total Employees
Fewer than 5 People