JG Series Air Steam Dryer

Specifications

Principle

       Air dryer can remove moisture from raw materials of granule or powder that are easy to dehydrate (mainly water in surface). Under the drying air, the quality of finished products can be controlled to the best state because of raw material can stay here in a short time. The drier of our factory is developed to add a reinforced device of stepless speed exchange on the basis of basic type. When the humidity raw material is fed through screw feeder, it is mixed with air fully and under the broken and pushed by rotating knives, raw material is broken to fine granule. It moves onto the outlet at the same time of drying. Finally it enters into drying pipe under the absorbing of air force. At the place it is dried further. The humidity and heavy granule that is not absorbing of air force. At the place it is dried further. The humidity and heavy granule that is not absorbed by air is broken and dried continuously till entering the drying pipe. The eddy drier also may deliver according to the requirement.

Application

       This dryer is suitable for the raw materials that contain more moisture and appear paste and other raw materials that can not be dried with other drying methods. For example, copolymer of vinyl acetate and chloroethylene, cellulose acetate, catalyst, C.M.C, CT-1 resin, burnt plaster, electrolytic manganese dioxide, anthraquinone ammonium sulphonate, flour, diatomaceous, silica gel catalyst, born powder, potassium perchlorate sulfonamide, synthesis resin, active gluten, active argil, chemical filter cake, titanium dioxide, decanedioic acid, cooper sulphate, aluminum sulphate, sodium sulphate, calcium phosphate, starch, dyestuff, calcium citrate, coal earth, cement, compounds, ferric oxide, organic fuel, maize albumen feed, mica powder, medicine, dyestuff, paper pulp of potassium perchromate, lees residue and so on.

Technical Parameter