Contact Platform Support
Help CenterPlastic PVC UPVC CPVC Solid Water Pipe Extrusion Production Line
Related Products
-
Plastic PVC UPVC CPVC Solid Water Pipe Extrusion Machine Production LineUS$ 30,000 - 60,000MOQ: 1 Set -
WPC Wood Plastic Door Board Production Line WPC Board Making MachineUS$ 30,000 - 90,000MOQ: 1 Set
-
WPC Wood Plastic Door Board Production Line WPC Wood Plastic Board Making MachineUS$ 30,000 - 90,000MOQ: 1 Set
-
WPC Foamed Board Machine PVC Foamed Board Making Machine LineUS$ 40,000 - 90,000MOQ: 1 Set
-
Automatical Plastic and Wood WPC Mixture Dosing and Mixing Machine for PolyurethaneUS$ 70,000 - 100,000MOQ: 1 Set
SJPGZ series plastic PVC UPVC pipe extrusion production line is used for manufacturing PVC pipes
on different diameters and thickness ranges which are mainly applied in agricultural and construction
water supply and drainage treatment, overhead or underground wires and cables. Due to the special
characteristics of the plastic PVC pipes they are widely used in the fields of crude oil transportation,
chemical industry which requires high temperature resistance and corrosion resistance, hot and luke
warm water supply, drainage system, and municipal engineering works like buried pipes of high and
extra high voltage electricity, protection sleeves and so on.
The models information about plastic PVC pipe extrusion production line:
Main Features on plastic PVC UPVC pipe extrusion production line
This production line consists of conical parallel twin-screw extruder, vacuum sizing platform, tractor,
cutting machine, stacker, etc.
1) the conical parallel twin-screw extruder and tractor adopts AC frequency control and England
Eurotherm DC speed regulator. Vacuum pump and tractor adopts high-quality products.
2)Tractors can be divided into up and down pedrail, three-claw, four-claw, six-claw, etc. In terms
of thickness and diameter of the pipes. The performance of the production line is reliable and the
output is high.
3)In accordance with different requirements of the clients, the company will equip the extrusion line
with specific devices to form pipe production lines of inner-wall spiral pipes, inner hollow wall pipes
and inner layer foaming pipes.
Plastic PVC UPVC pipe extrusion production line is in standard sea-worthy package mainly uses wooden pallets & film and electrical parts in plywood. In 1~3 40' containers.
1. Can supply project analysis report.
2. Can suggest machine model and parameters.
3. Can design factory lay-out and power facilities accounting.
4. Can provide the product formula on different kinds of products.
5. Can supply the relative products treatment technology.
6. Can provide the staff operation training.
7. Can send engineers to service overseas.
8. Can supply the various solutions to the actual questions in production.
9. Can provide the installation and commission in buyer’ factory.
10. Can supply the hardware and software updating technology after-sales.
11. Can finish the turn-key project
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
PVC Laminated Gypsum Board Production LineUS$ 100,000 - 200,000MOQ: 1 Set
-
With Iron Full Plastic Mask Nose Wire Making Machine for Face MaskUS$ 15,000 - 15,000MOQ: 1 Set
-
Factory Price Melt Blown Fabric Production Equipment and Extruder LineUS$ 120,000 - 130,000MOQ: 1 Set
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Air Bubble Roll Line Stage LightingUS$ 20,000 - 60,000MOQ: 1 Set
-
Food Grade Silicone ProductsNegotiableMOQ: 1 Piece
-
Semi-auto Finger Joint Shaper(hydraulic)NegotiableMOQ: 1 Piece
