Contact Platform Support
Help Center
Related Products
-
Best Seller LCD Vacuum Separator Machine For Cellphone RepairsNegotiableMOQ: 1 Piece -
High Quality Electric LCD Vacuum Separator MachineNegotiableMOQ: 1 Piece
-
New Arrival Iphone 6 Frame Laminating Machine Without Air CompressorUS$ 1 - 498MOQ: 1 Piece
-
5 in 1 Oca Laminating Machine for Repairing Cell Phone Touch ScreenUS$ 1 - 1,500MOQ: 1 Piece
-
New Arrival Mobile Phone Univeral Positioning Mould for All Kinds of Mobile Phone Lcd and ScreenUS$ 1 - 30MOQ: 1 Piece
2in1 Vacuum Separator Machine For 14inch Screen
1) Model: TBK-968
2) Supply: AC100-240V
3) Power: 500W
4) Size: 240x370x120mm
5) Net Weight: 7.5KG
1) With the vacuum separator, you will not be worried about your damaged screen of mobile
phonesor tablets. It helps to separate the LCD and glass and you have no need to replace
the whole displaypart of your phones and tablets which can save money. Several buttons to
operate, easy to use.
2) 2 kinds of vacuum separator for your choice: One is specially designed for separating
damaged LCD screen of mobile phones. The other one is 2in1 separator which is both
suitable for mobile phones and tablet screen separating.
3) Built-in vacuum pump, the screen is forced to attach to the machine firmly because of
pressure difference, no additional holding clamp needed.
4) Automatic heating. With the thermostat you can set required temperature. Temperature is
clearly displayed, convenient to read.
5) Low noise, stable performance, easy to operate.
6) The damaged screen is convenient to collect which is environment friendly.
7) Come with silicon pad to avoid air leak which ensures great vacuum effect.
8) Suitable for iPhone/Samsung/HTC phones and tablets.
1) Turn on the power switch;
2) Set the temperature to 80 celsius degree;
3) The temperature of the heated plate reaches 80 celsius degree 1-2 minutes later;
4) Put the silicon pad on the heated plate holes to holes.
5) Put the screen downwards to the holes of the heated plate.
6) Turn on the vacuum switch (2in1 separator: S1 for phones, S2 for tablets).
7) After the screen is sucked tightly, use the steel wire(not included) to separate the LCD and glass.
8) Remove the LCD and the separation process is finished.
Note:
If the screen is damaged badly, you can fix it with heat resistant tape(not included) before separating.
Send Inquiry to This Supplier
You May Also Like
-
Weighing Booth/dispensing Booth/vertical Flow BoothNegotiableMOQ: 1 Set
-
Automatic Brick Making Machine Equipment Cement Brick Making Machinery From China Construction Compressed Brick Making MachineUS$ 399 - 1142MOQ: 1 Set
-
Air Compressor Low Cost Low Temperature DehumidifierUS$ 1 - 10000MOQ: 1 Piece
-
Tu0 C1011 C10100 C110 Pure Copper Bar Customized Industrial Seamless Good QualityNegotiableMOQ: 1 Ton
-
Perkins Engine 404-22 Original Brand New 4-cylinder GN71039 24.3KW/1800CNegotiableMOQ: 1 Piece
-
Metallographic Sample Thin Section Equipment/Specimen Cutting MachineUS$ 22183.35 - 23093.07MOQ: 1 Set
-
Waste Car Radiator Crushing Separating Machine Scrap AC Radiator Recycle MachineUS$ 37865MOQ: 1 Set
-
Genyond Brand Ballpoint Pen Refill Tube Making MachineNegotiableMOQ: 1
-
Belt ChainNegotiableMOQ: 1 Set
-
15m Motorcycle Production Assembly Line Cheap MarketingNegotiableMOQ: 1
