Contact Platform Support
Help Center
Related Products
-
Die Casting / Aluminum Die Casting/ Zinc Die Casting / Copper Die Casting / According to DrawingsNegotiableMOQ: 1 -
Investment Casting / Lost Wax Casting / According to DrawingsNegotiableMOQ: 1
-
Sand Casting / Steel & Iron Samd Casting / Aluminum Sand Casting /According to DrawingsNegotiableMOQ: 1
-
Large Sand Casting Production / Heavy Machine Tool Bed /According to DrawingsNegotiableMOQ: 1
-
Resilient Seated Gate Valves / Knife Gate Valves / Butterfly Valves / Check Valves / Pipe FittingsNegotiableMOQ: 1
Cast steel anode yoke for electronic aluminum industry
1. Sow Mould
Two-Claw/Pin,Three-Claw/Pin ,Four-Claw/Pin,Six-Claw/Pin,Eight-Claw(Anode Yoke) Casting Process:Sand casting, V-process casting, Lost foam casting
2. V-Process Casting.
An vacuum process automatic moulding and production line has been built up here and large castings can be casted.Compared with sand casting,V-Process castings have lots of advantages:
A. Low Operation & Tooling Cost
B. Tight Tolerances
C. Fine Finish Surfaces(Fine surface is very important for removing sows or ingots from the moulds)
D. Quick Turnarounds and Short Lead Times.
E. Thin-Wall Capability.
F. Unlimited Pattern Life
3.Castings between 20kgs to 10 000 kgs are available here.
4.Material: Carbon Steel,Alloy Steel,Stainless Steel, Ductile Iron of All Standards or Customer Specifications.
Send Inquiry to This Supplier
You May Also Like
-
GH4133 GH4133B GH4163 High Temperature Alloy Forgings High Strength Forged Flange RingNegotiableMOQ: 100 Pieces
-
ANSI 316L Inlet Flange Forged Stainless Steel FlangeUS$ 39MOQ: 1 Piece
-
Precision Electrical Pure Iron Forging for Transformers and Inductors in Power IndustryNegotiableMOQ: 1 Ton
-
OEM Factory Stainless Steel Ring Forging Parts Stainless Steel Hot Forged TitaniumNegotiableMOQ: 1 Ton
-
Plastic Flange Protector End Cap Flange Protective CoverNegotiableMOQ: 100 Pieces
-
With Machining Surface Reusable Metal Casting Mechanical PartsNegotiableMOQ: 100 Pieces
-
High-precision Carbon Steel Flange Customization Large Diameter Stainless Steel Flanging Butt Welding Flange Carbon Steel Flat Welding FlangeUS$ 1.5 - 100MOQ: 1 Piece
-
CNC Machining Parts Ductile Iron Material of Construction Engineering Fittings Parts FastenerUS$ 1 - 2MOQ: 1000 Kilograms
-
Forged OEM ComponentsUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Metal Pipe Flange for 25mm Suqre PipeUS$ 0.6 - 1.5MOQ: 1000 Pieces
