Specifications
pneumatic steel strapping tool1.easy to carry,handheld operate
2.clever design
3.Light weight
A480 pneumatic steel strapping tool for aluminum ingot
techinic parameter:
strap material | Seal tensile strength | tensioning stength | strap tensioning speed | spec | air pressure | weight |
steel strap
| ≥6.3KN | ≥4.9KN/0.6Mpa | 5.5m/min | (16-19)×(0.38-0.8)mm
| 0.420.6Mpa
| 5kg
|
Maintenance & Repair
*The problems of wearing parts, loose screw, environmental pollution, and bad lubricating probably cause the malfunction during the operation. You shall clear it promptly to make it run properly. Good attention to the maintenance will have a much longer use of steel strapping tools.
*Before every use, it shall be treated with lubricant.
*Timely remove the dust and dirt on the friction pulley.
Send Inquiry to This Supplier
You May Also Like
-
6'' Composite Orbital Plam SanderNegotiableMOQ: 100 Pieces
-
Pneumatic Tool PartsNegotiableMOQ: 1 Set
-
ZY24 Air Leg Rock DrillNegotiableMOQ: 1 Set
-
Air Rivet GunUS$ 15 - 30MOQ: 50 Pieces
-
300mm Nozzle Air GunNegotiableMOQ: 1000 Pieces
-
Pneumatic PickUS$ 15 - 15MOQ: 10 Sets
-
Air Powered Diamond Chain Saw,Cut off Saw and Breaker HammerNegotiableMOQ: 10 Sets
-
LF-JADG-07 Air Die Grinder (2"SHAFT)US$ 5 - 20MOQ: 500 Pieces
-
Investment Casting Pneumatic Tools Accessories With Stainless Steel and Alloy Steel MaterialsUS$ 0.1 - 5MOQ: 500 Pieces
-
HAND HELD SANDBLASTERNegotiableMOQ: 500 Sets