KTLY-32 Pneumatic Retractable Bundling Tensioner

Specifications

KTLY-32   Pneumatic Retractable bundling tensioner

KTL-32 Pneumatic tesioner

1,Product series:KZL series

2,Strap material:steel strap

3,Air pressure:0.4-0.6Mpa

4,Strap spec:(25-32)*(0.8-1.2)mm

5,Strap tensioning speed:5m/min

6,Tensioning strength:>=9.8KN/00.6Mpa

7,Weight:4.3kg

KTY-32 Pneumatic sealer

Air pressure:0.45-0.6Mpa

Steel strap spec:32*(0.8-1.2)mm

Strap way:strapping buckle

Strap tensile strength:>=16.8KN

weight:3.5kg

Maintenance & Repair

1The problems of wearing parts, loose screw, environmental pollution, and bad lubricating probably cause the malfunction during the operation. You shall clear it promptly to make it run properly. Good attention to the maintenance will have a much longer use of steel strapping tools.

2Before every use, it shall be treated with lubricant.

3Timely remove the dust and dirt on the friction pulley.                                                          

product details picture

operation process

strapping example

factory and office