Contact Platform Support
Help CenterWear Resistance Cemented Carbide Plates for Perphery Grinders
Related Products
-
Tungsten Alloy Sheet Plate Used in the Sapphire Growth FurnaceUS$ 30 - 35MOQ: 5 Kilograms -
High Quality Durable Carbide Plates Cementd Boards for Mini-crusherUS$ 30 - 35MOQ: 5 Kilograms
-
Flat Thread Rolling Dies Tungsten Carbide Sheet Blank for Reflection ShieldUS$ 30 - 35MOQ: 5 Kilograms
-
Tungsten Carbide Sheet Used in Parts of Electric Light Source and Electron TubeUS$ 30 - 35MOQ: 5 Kilograms
-
Factory Direct Sale Tungsten Carbide Plate Enhance the Wear Parts Working ToolsUS$ 30 - 35MOQ: 5 Kilograms
Wear resistance Cemented carbide plates for perphery grinders
Features of Tungsten carbide plates
Tungsten carbide wear plate,made from 100% virgin tungsten carbide raw materials.It can be used in wide application field. Tungsten carbide wear plate have high hardness, good red hardness,excellent wear resistance, High Elasticity Modulus and compressive strength.The chemical properties of our tungsten carbide plates is stable,also the impact toughness & dialatation coefficient is low. The heat-conducting property and electrical conductivity of tungsten carbide plate is close to iron or iron alloy.
Application:
Tungsten carbide plates, have high hardness, wear-resistance, and resistance to bending. They're widely used in cutting tool, crusher, wear parts, moulding base and other fields.
Free smaple was available!
Mains Grade for Tungsten carbide plates
Grade No. | Density (g/cm³) | Hardness (HRA) | T·R·S (MPa) | Application Recommended |
| YG4C | 45.00 | 89.5 | 1800 | Mainly used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG6 | 15.80 | 89.5 | 1700 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8 | 14.70 | 88.5 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8C | 14.70 | 88.0 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG9C | 14.50 | 87.0 | 2400 | Mainly used as the inserts and buttons for rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
| YG11C | 14.40 | 86.5 | 2450 | Chiefly for the inserts and buttons of heavy rock drill bits and rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
| YG13C | 14.30 | 86.0 | 2500 | It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
| YG15 | 14.00 | 86.5 | 2500 | It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
| YG16 | 14.10-14.30 | 87.5 | 2400 | It is mainly used for making cemented carbide substrate tips to be used in PDC cutters for excavating coal and oil field PDC bits. |
| YG20 | 13.40-13.70 | 85.0 | 2254 | Mainly for the stamping dies used in the conditions of heavy impact load and large strees |
ZhuZhou HongTong Tungsten Carbide Co., Ltd., located at Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.
The company sets up an independent production and R&D base, covering a total area of 7,000m2 and a plant area of 4,000m2. There is a group of experienced technical personnel and a staff of 80 people including 5 engineers, 8 assistant engineers, and 29 people having college degree or above. The company mainly produces cemented carbide drawing dies, cold heading dies, mining tools, sealing rings, and other nonstandard products, wherein the cemented carbide drawing dies and cold heading dies take a leading position in the industry, and the bore of wire-drawing die can be minimized to 0.1mm, deeply popular with customers.
Send Inquiry to This Supplier
You May Also Like
-
Angle Grinder Universal Woodworking Tools Starlock SawbladesNegotiableMOQ: 20 Pieces
-
Adjustable Countersink Drilling Bit SetUS$ 1 - 30MOQ: 3000 Sets
-
Tungsten Carbide Inserts to SpecificationUS$ 1 - 1.5MOQ: 100 Pieces
-
BladesUS$ 2 - 2.5MOQ: 5 Pieces
-
Masonry Router Bits For WoodUS$ 1 - 4.8MOQ: 100 Pieces
-
NozzleUS$ 12 - 50MOQ: 20 Pieces
-
Modelling Ball Tools Double Sided Bone Carving Tools 8 Different Sizes IncrementsUS$ 1 - 100MOQ: 100 Pieces
-
Item No.: STA4252 Cutter&BladeUS$ 1.5 - 1.55MOQ: 2000 Sets
-
Non Sparking Tools,U-type Bronze Alloy Shackle,power Tools,ISO9001,UKASUS$ 2.3 - 45MOQ: 1 Piece
-
Brush Cutter, Chainsaw Spark PlugsUS$ 0.05 - 0.5MOQ: 5000 Pieces
