Contact Platform Support
Help CenterTungsten Carbide Coal Cutter Drag Bits
Related Products
-
Wolfram Carbide Ball Teeth Used in Petroleum and QuarryingUS$ 1 - 10MOQ: 100 Pieces -
Long Life Mining Tools Tungsten Carbide Rock Drill BitsUS$ 30 - 35MOQ: 5 Kilograms
-
Rotary Drilling Rig of Carbide Buttons in Project ApplicationUS$ 30 - 35MOQ: 5 Kilograms
-
Factory Good Quality K30 K40 Tungsten Carbide Drill Bit for Coal MineUS$ 30 - 35MOQ: 5 Kilograms
-
Tungsten Carbide Bullet Teeth for DTH Drilling BitUS$ 30 - 35MOQ: 5 Kilograms
Tungsten carbide Coal cutter drag bits
Features of Tungsten carbide ball tooth
Tungsten Carbide ball tooth has superior wear resistance and impact toughness, and similar products with higher speed of drilling and digging.Series of ball tooth bit passivation using cycle is long, not to grind the life span of about the same diameter RenPian grinding head drill bit 5-6 times of life, is beneficial to save auxiliary working hours, physical labor and reduce workers to speed up the project
Application:
Tungsten Carbide ball tooth is widely used in oil drilling and snow removal of snow plough device.In addition, carbide ball tooth in the cutting tool and coal mining machinery, road maintenance and drill tool also has a good application.Mining with cemented carbide balls tooth mainly used for quarrying, mining, and mining tools in tunnel and civil construction.
Free smaple was available!
Mains Grade for Tungsten carbide button
Grade No. |
Density (g/cm³) |
Hardness (HRA) |
T·R·S (MPa) | Application Recommended |
| YG4C | 45.00 | 89.5 | 1800 | Mainly used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG6 | 15.80 | 89.5 | 1700 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8 | 14.70 | 88.5 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8C | 14.70 | 88.0 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG9C | 14.50 | 87.0 | 2400 | Mainly used as the inserts and buttons for rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
| YG11C | 14.40 | 86.5 | 2450 | Chiefly for the inserts and buttons of heavy rock drill bits and rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
| YG13C | 14.30 | 86.0 | 2500 | It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
| YG15 | 14.00 | 86.5 | 2500 | It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
| YG16 | 14.10-14.30 | 87.5 | 2400 | It is mainly used for making cemented carbide substrate tips to be used in PDC cutters for excavating coal and oil field PDC bits. |
| YG20 | 13.40-13.70 | 85.0 | 2254 | Mainly for the stamping dies used in the conditions of heavy impact load and large strees |
ZhuZhou HongTong Tungsten Carbide Co., Ltd., located at Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.
The company sets up an independent production and R&D base, covering a total area of 7,000m2 and a plant area of 4,000m2. There is a group of experienced technical personnel and a staff of 80 people including 5 engineers, 8 assistant engineers, and 29 people having college degree or above. The company mainly produces cemented carbide drawing dies, cold heading dies, mining tools, sealing rings, and other nonstandard products, wherein the cemented carbide drawing dies and cold heading dies take a leading position in the industry, and the bore of wire-drawing die can be minimized to 0.1mm, deeply popular with customers.
Send Inquiry to This Supplier
You May Also Like
-
Forged Crusher Hammer Head for Mining and Quarry ApplicationsNegotiableMOQ: 1 Piece
-
ASTM G65 Wear Resistant Liner Bimetal Alloy Steel Overlay PlateUS$ 299.69 - 299.69MOQ: 1 Square Meter
-
Drilling Equipments Drilling Fluids Vacuum DegasserNegotiableMOQ: 1 Set
-
Good Quality Tungsten Carbide Button InsertsUS$ 1 - 5MOQ: 100 Pieces
-
Airless Truck Tire Solid Vehicle Tire 17.5-25 20.5-25 for Mining Machine PartsUS$ 16 - 200MOQ: 1 Piece
-
Ball Mill Plant Used Automatic Feeding Electromagnetic Vibrating FeederUS$ 650 - 800MOQ: 1 Set
-
API 16A Cameron/shaffer Type Single Ram BOP Manual for Oilfield DrillingUS$ 100000.00 - 100000.00MOQ: 1 Set
-
High QualityBearing Seat Sodium Ductile Iron Pipe Clampsductile Iron CastingUS$ 0.8 - 1.3MOQ: 1 Metric Ton
-
Silicon Bouncing Ball for Vibro SifterUS$ 0.5 - 0.8MOQ: 200 Pieces
-
Wear Resistant Jaw Crusher Toggle Plate Whatsapp008615290435825US$ 1 - 500MOQ: 100 Pieces
