Contact Platform Support
Help Center30KN Cable Laying Puller Overhead Transmission Puller
Related Products
-
30KN Stringing Electric Hydraulic Cable Puller For 220KV Overhead Line TransmissionUS$ 18,000 - 20,000MOQ: 1 Set -
280KN Hydraulic Puller For Stringing Conductor 220KV or 500KV Overhead Line TranismissionUS$ 20,000 - 30,000MOQ: 1 Set
-
60KN Hydraulic Cable Puller For Stringing ConductorUS$ 35,000 - 40,000MOQ: 1 Set
-
40KN Pulling Type Hydraulic Cable PullerUS$ 20,000 - 30,000MOQ: 1 Set
-
30KN Steel Wire Rope Hydraulic Puller Used In Overhead Transmission LineUS$ 18,000 - 20,000MOQ: 1 Set
30KN Cable Laying Puller Overhead Transmission Puller
Hydraulic Puller Introduction
Hydraulic Puller is used for rolling steel rope in power overhead transmission, it work with the hydraulic tensioner.Through the two machines' cooperation and anti-twisting steel rope's pulling, conductor overhead tansmission becomes easy to reach the target.
1, this hydraulic puller is single bridge structure trailer.
2, the speed of the bull wheels can be varied stepless in both rotation directions. The pull can be controlled and be volume can be read on the dynamometer.
3, the max pull can be adjusted and equipped with overload protection system.
4, spring applied-hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
5, with self-loading reel winder with automatic level wind,(hand work is also ok) to ensure that the wire can be evenly wound on the pilot wire reel.
6, hydraulic front jack and surge brake for axle.(can be chosen)
7, pre-heat unit to ensure the motor can be easily started in the cold weather.(can be chosen)
Technical Data
| Product No. | 020101 |
| Type | WQT30-IV |
| Technology characteristics | |
| Max pull(kn) | 35 |
| Max continuous pull(kn) | 30 |
| Corresponding speed(km/h) | 2.5 |
| Max pull speed(km/h) | 5 |
| Corresponding pull(kn) | 15 |
| Structure characteristics | |
| Puller groove bottom diameter(mm) | 300 |
| Groove | 7 |
| Max reliable pulling rope diameter(mm) | 13 |
| Max fixed joint diameter(mm) | 40 |
| Overall dimensions(mm) | 3200×1600×2000 |
| Weight(kg) | 2000 |
| Main components | |
| Engine | Cummins water cold |
| Power/rotating speed | 77kw/2500rpm |
| Reducer | Bonfiglioli made in Italy |
| Main hydraulic pump | Rexroth made in Germany |
| Main hydraulic handle | Rexroth made in Germany |
| Hydraulic valve | Atos made in Italy |
| Main hydraulic motor | Rexroth made in Germany |
| Hydraulic meter | Wika made in Germany |
| Pull meter | Fantinelli made in Italy |
| Hydraulic pipeline system | Manuli made in Italy |
| Electrical System(v) | 24 |
Send Inquiry to This Supplier
You May Also Like
-
Types Car Jack Trailer Car JackUS$ 18 - 18MOQ: 1 Set
-
Hydraulic Synchronous Jack Sync Jack-up SystemUS$ 420 - 1,000MOQ: 1 Set
-
XY-2 Portable Core Drilling MachineUS$ 1 - 1MOQ: 1 Set
-
Carbide Ball Nose End Mill Clinder Pneumatic Hand ToolUS$ 1 - 30MOQ: 3000 Pieces
-
Hydraulic Crimper Tool Hydraulic Cable Crimper Hydraulic CrimperUS$ 5 - 100MOQ: 100 Pieces
-
Motorcycle Support StandNegotiableMOQ: 10 Units
-
Vehicle Tools Car Jacks 2 Tons Scissor Jack For Lift Car VanNegotiableMOQ: 100 Pieces
-
Hydraulic SplitterNegotiableMOQ: 1 Set
-
100% of Non Sparking Safety Tools,3&3 Leg Gear PullerUS$ 6.73 - 24.82MOQ: 1 Piece
-
5T AIR HYDRAULIC JACK WHOLESALEUS$ 3.84 - 9.84MOQ: 10 Pieces
