Contact Platform Support
Help CenterCutting Edge for Tractor Bucket Tractor Grader Blades 234-70-12710
Related Products
-
Motor Garder Cutting Edge Overlay Price 9J3862US$ 100 - 300MOQ: 10 Pieces -
Spare Part for Motor Grader Blades 3Y0035US$ 20 - 20MOQ: 10 Pieces
-
Motor Grader Blade Cutting Edge HB360 HB450 for Farm TractorUS$ 20 - 20MOQ: 10 Pieces
-
Spare Parts Serrated Bolt on Snow Blade or Motor Grader Blades 7T9977US$ 20 - 20MOQ: 10 Tons
-
Motor Garder Cutting Edge Overlay Price 8D2786 PW2297US$ 100 - 300MOQ: 10 Pieces
Cutting edge for tractor bucket tractor grader blades 234-70-12710:
1. OEM Part Number: 5D9553/5D9554/5D9558/5D9559/7D1158/7D1949/4T2242/4T2244...
2. Material: High carbon steel or boron steel with heat treatment for curved grader blade
3. Hardness: HB280~320 or HB320~360 or HB440~480
4. Thickness: 1/2’’ (13mm), 5/8’’(16mm), 3/4’’(19mm), 1’’(25mm)
5. Double Bevel Curved(DBC) Width: 6’’ (152mm), 10’’ (254mm),
Double Bevel Flat (DBF) Width:11’’ (280mm), 12’’ (305mm), 13’’(330mm), 16’’(406mm)
6. Different type: Curved grader blade, Flat grader blade, Curved Serrated blade, Flat Serrated blade
7. Available to all brand motorgrader domestic and overseas especially for Caterpillar and Komatsu.
Material Selection:
Materials |
Hardness
(HB) |
Yielding Strength (MPa) |
Tensile Strength (MPa) |
Elongation
(%) |
Impact Energy (J) |
HM400 |
370-430 |
≥1050 |
≥1250 |
≥12 |
≥25(-20℃ KV) |
HM500 |
470-520 |
≥1250 |
≥1450 |
≥7 |
≥40(25℃ KU) |
HC80 |
250-330 |
≥450 |
≥900 |
≥11 |
≥15(25℃ KU) |
HC45 |
Specification is adjusted by the technical requirement |
||||
v Over 6 years supplying cutting edges,end bits and blades,bucket teeth,guard,bolt &nuts,steel plate for loader,bulldozer,grader and excavator
v Factory covers up to 5,000 square meteres, with 50 veteran workers
v 1800 metric tons montly production capacity
v 3 engineers & technicans with 6 years experiences in designing and developing cutting edges
v 13 months full replacement warranty
Part Number for your reference:
Higher Blades Company have the world advanced level laboratory, owns metalloscope, impact energy tester, Tensile strength tester, Brinell/Rockwell hardness tester, etc. Support SGS, BV, TUV etc third party testing and report.
Packaging: Export plywwood pallet.
Shiping: 10-15 DAYS.
Welcome to visit our booth A3 517B BAUMA 2016 Germany!
Whatsapp/Mob:0086 13808932932
Tel:0086 531 88687733
Mob:0086 13808932932
Fax:0086 531 88685511
Skype: higherblades03
Lisa
Send Inquiry to This Supplier
You May Also Like
-
Genuine Advance Internal Frictional Disc 7502-019 Gearbox PartsNegotiableMOQ: 1 Bag
-
ORIGINAL SDLG Steering Knuckle 28080002381 APPLY FOR SDLG MOTOR GRADER G9180 G9190 G9200US$ 11.5 - 20MOQ: 1 Unit
-
SANY Container Telescopic Hydraulic Spreader SDJ350-H1 for SDJ350 Port MachineNegotiableMOQ: 1 Piece
-
Good Price 04050-11212 Pin Construction Machinery PartUS$ 1.00MOQ: 1 Unit
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Rock Sieve Bucket 1350mm 1500mm for CAT330 CAT336 Excavators Heavy Reinforced Skeleton Bucket With TeethUS$ 1500 - 3500MOQ: 1 Piece
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
