New water treatment Aluminium chloride hexahydrate from WADE

Polyaluminium chloride (PAC) is high-efficient ,cheap and nontoxic inorganic high molecular compound .It's easily soluble in water .In the hydrolytic process ,it is accompanied with the chemical processes such as electrochemistry ,coagulation ,absorption and precipitation .The product has the features inculding wide applicable range of PH value ,large granule ,and quick speed in sedimentation .It's widely used in treating the domestic drinking water ,domestic sewage and industrial waste water.

Product Advantages

1) Flocculation ability, high adsorption activity, floc formation and deposition of fast.

2) Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation.

3) Easily to use and good effective.

Specification 

Usage 

Widely applied for treating the domestic drinking water ,domestic sewage and industrial waste water.

Storage

The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .

Features

a)Polyaluminum Chloride is obviously effective in purifying high turbid water without adding alkaline additives.

b)Polyaluminum Chloride is suitable for wide range of water quality,alum flower formed is quick and big, easily settled.

c)Polyaluminum Chloride has fast flocculating rate, small corrsiveness and low labour intensity.

Application method

1)The liquid product can be used directly or used after dilution.

Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.

2)The specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton.