Joint Clamp Fence Joint Clamp Electric Fence Joint Clamp Tape Joint Clamp,20mm
Specifications
Joint clamp:1.Easy for installing
2.Low costs but high efficient
3.High quality
The discription:
Joint clamp :
- 1.Steel with galvanize treatment
- 2.Easy for installing and removing,the good ideal for animal fence
- 3.Low costs,but high efficient
- 4.Size:20mm*40mm*2mm thickness
How to Install a Portable Electric Horse Fence?
Installing a portable electric fence is the perfect way to keep your horses safe at home--
or away from home.
If you love to trail ride, you will need a way to keep your horses contained on those
overnight trips, and a portable electric fence is an easy solution to that problem.
Putting up a portable electric fence is also an excellent way to let your horse take care
of that overgrown lawn, but it is important to install that fence properly.
Installing a Portable Electric Fence
1.
Begin by measuring the area you need to fence.
These measurements will allow you to determine how much fencing and how many fence
posts you will need. Fence posts should be placed a maximum of 8 to 10 feet apart, so be
sure to measure each line you will need to fence and use those measurements to determine
how many fence posts you need. Kick-in fence posts work particularly well for portable
fences--they are easy to install and easy to remove.
2.
Place the first fence post in one of the corners and pound it into the
ground.
If you are using kick-in electric fence posts, they should have a mark on them that
indicates how far into the ground they need to go. Use this mark as your guide and make
sure the fence post is in the ground far enough to be stable.
3.
Measure 8 to 10 feet from the first fence post and place the next one into
the ground.
Continue to measure the distance between the fence posts and place each
post in the ground securely. Once all of the fence posts have been placed into the ground
you are ready to begin stringing the electric fence wire or the electric hot tape.
4.
If you are using traditional electric wire you will need to install insulators
on the fence posts.
When installing insulators, be sure to measure the proper distance
from the ground on each fence post. For best results, use at least two strands of electric
wire, with the first strand at least 18" off the ground and the second strand at least 6"
above that. Also, be sure to tie white rags to the fencing to make it visible to your horses.
5.
Use hot tape if desired to create a more visible portable electric fence.
Hot tape has a number of advantages over traditional electric wire, including better visibility
and easier installation. String the hot tape around the posts using at least two strands for maximum visibility. After the hot tape or electric wire has been strung, run the end of the
wire to your portable fence charger. A solar charger works great for portable fences--just
make sure you give it plenty of time to charge before putting your horses into the fence.
Send Inquiry to This Supplier
You May Also Like
-
High-Quality Galvanized Steel Wrought Iron Fence for Ornamental and Decorative UseNegotiableMOQ: 500 Meters
-
Diamond Metal Galvanized PVC Coated Chain Link FenceUS$ 9.5MOQ: 1 Square Meter
-
Solar Electronic Rodent Repellent, Ultrasonic Snake Repellent, Outdoor New Energy Repellent for Stray Dogs and Cats(Wechat:13510231336)US$ 9.5MOQ: 1000 Pieces
-
Chain Link Fence/ Diamond Outdoor Metal Fencing/Steel Wire Fencing Project/ FENCE/pvc Coated Chain Link FenceUS$ 10MOQ: 1 Foot
-
Wrought Iron Fence 1.0m High 2.4m Wide Pre-Assembled With Gate HingesNegotiableMOQ: 50 Cubic Centimeters
-
Safety & Anti-theft GuardrailNegotiableMOQ: 2000 Sets
-
Wrought Iron Garden Fence for Vineyard and Estate ProtectionNegotiableMOQ: 500 Square Meters
-
Galvanized Round Yard Pen Panel for Horse, Sheep, and Cattle CorralNegotiableMOQ: 100 Pieces
-
Plastic Fence Post Top Cap for Pipe End Porch RailingNegotiableMOQ: 100 Pieces
-
High Quality Metal Bird Pigeon Trap Cage With Metal Wire Door Iron Animal TrapUS$ 23.00MOQ: 10 Pieces
