Contact Platform Support
Help CenterGrp Frp Channel Steel Fiberglass Beams
Related Products
-
Frp Channel Beam/ Frp Material/frp RebarUS$ 5 - 15MOQ: 500 Meters -
FRP Pultrusion Channel Steel/frp Channel Steel/ U-shaped Channel SteelUS$ 28 - 30MOQ: 100 Meters
-
Frp U Shape Beam/C Channel Beam/Anti-corrosion Pultruded Frp ProfileUS$ 4 - 15MOQ: 2000 Meters
-
Made in China High Strength Frp Steel Channel,fiberglass Channel Steel ,U-shaped Channel SteelUS$ 5 - 6MOQ: 100 Meters
-
C Channel Steel / Frp Channel Steel/steel ChannelUS$ 28 - 30MOQ: 100 Meters
Pultrusion technique
During the pultrusion process, the raw material are pulled through a heated steel forming die using a continuous pulling device. when the reinforcements are saturated with the resin mixture in the resin bath and the wetted reinforcement package is wrapped in a surfacing veil. the completed package then goes into premolding stage that roughly forms the package into the appropriate shape to enter the heated trimming die for curing. the trimming die is the exact shape of the final part desired. upon exiting the trimming die, the part is over 90% processing and solid. Cutting in accordance with requirements of the length, the entire process is completed.
FRP is an excellent insulation material, nonreflective. And it is not to interrupt transmission of microwaves, no rust, and it is safe to use long-term.
Good corrosion resistance can be resist water, gasoline, alcohol, electrolytic salt, acetic acid, hydrochloric acid, sodium and potassium compound s, urine, and asphalt corrosion. Also It can be for a variety of acid soil, and it has a good anti-aging properties. The surface has a layer of UV-resistant to protect, so that makes products with higher anti-aging properties.
Fiberglass signs pile impacts strongly without deformed. It is high tensile strength, flexural strength and impact toughness. Its gravity is between 1.9-2.0, and can be met the outdoor to use.
Tensile strength ≥160MPa
Flexural strength ≥190MPa
≥150MPa bending strength after immersion in water
Barcol hardness ≥38
Ring stiffness (5%) ≥50KPa
Heat distortion temperature ≥160 °C
Oxygen index of 26%
Send Inquiry to This Supplier
You May Also Like
-
Cold Formed Galvanized Steel Channel Custom Sizes Building Material Metal Support Frame C Type Channel Steel C ProfilesNegotiableMOQ: 1 Ton
-
Steel ChannelNegotiableMOQ: 2700 Tons
-
Hot Rolled Carbon Steel Channel Q235B Q355B ASTM A36 Structural C Channel for Construction Workshop FrameNegotiableMOQ: 2 Tons
-
Carbon Steel High Quality China C Channel SteelUS$ 380 - 700MOQ: 5 Tons
-
Chrome Plating H Channel/Upright for Shopping MallNegotiableMOQ: 1000 Pieces
-
JINXIN Stainless Steel 304/316 Strut Channel End CapUS$ 10 - 80MOQ: 10 Sets
-
OEM Carbon Steel Galvanized Cable Rack T-slot Channel RackingUS$ 1 - 10MOQ: 100 Pieces
-
Double Slotted C Channel for Brackets/slotted c Channel/thin Wall ChannelNegotiableMOQ: 1000 Pieces
-
Steel Z PurlinUS$ 500 - 650MOQ: 5 Tons
-
Steel ChannelUS$ 1500.00 - 1500.00MOQ: 1 Ton
