Contact Platform Support
Help CenterInduction Hardened Chromium Plated Tube
Related Products
Specifications
Hard chrome plated steel tubes , piston rod for hydraulic and pneumatic cylinderCHROMED BARS
Hard chrome platedsteel bars Ck45
RANGE AND TOLERANCE.
- Diameter: 6-200 mm.
- Tolerance: ISO f-7, h7,
- Surface roughness: Ra. 0.2-0.8
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- HRC18-20
RANGE AND TOLERANCE.
- Diameter: 6-200 mm.
- Tolerance: ISO f-7, h7, .
- Surface roughness: Ra. 0.2-0.8
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- HRC58-62
TECHNICAL PROPERTIES.
- Induction hardening depth: 1-5,4 mm.
RANGE AND TOLERANCE.
- Diameter: 6-200 mm.
- Tolerance: ISO f-7, h7, .
- Surface roughness: Ra. 0.2-0.8
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- HB260-280
RANGE.
- Outside diameter: 12-120 mm.
- Wall thickness: 2-12 mm.
TECHNICAL PROPERTIES.
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- Chrome layer hardness: 66-68 HRC.
- HRC18-20
- Steel grade: CK45.
TOLERANCES.
- Outside diameter: ISO f-7.
- Surface roughness: Ra.0.2-0.8
RANGE.
- Outside diameter: 12-120 mm.
- Wall thickness: 2-12 mm.
TECHNICAL PROPERTIES.
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- Chrome layer hardness: 66-68 HRC.
- HRC58-62
- Steel grade: CK45.
TOLERANCES.
- Outside diameter: ISO f-7.
- Surface roughness: Ra.0.2-0.8
- Outside diameter: 12-120 mm.
- Wall thickness: 2-12 mm.
TECHNICAL PROPERTIES.
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- Chrome layer hardness: 66-68 HRC.
- HB260-280
- Steel grade: CK45.
TOLERANCES.
- Outside diameter: ISO f-7.
- Surface roughness: Ra.0.2-0.8
RANGE AND TOLERANCE.
- Diameter: 20-200mm.
- Tolerance: ISO f-7.
- Stainless grades: AISI 431, AISI 316,AISI 304.
- Surface roughness: Ra. 0.2-0.8
TECHNICAL PROPERTIES.
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
RANGE AND TOLERANCE.
- Diameter: 8-150 mm.
- Tolerance: ISO f-7.
- Surface roughness: Ra. 0.2-0.8
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
RANGE AND TOLERANCE.
- Diameter: 20-120 mm.
- Tolerance: ISO f-7.
- Surface roughness: Ra. 0.2-0.8
TECHNICAL PROPERTIES.
- Hard chrome plated thickness: 0.012-0.015mm,0.015-0.02mm, >0.02mm
- Induction hardening depth: 0.75-3.5 mm.
Honed Tubes
DESCRIPTION.
Honed tube. Inside tolerance H8.
RANGE.
- Inside diameter: 40-500 mm.
- Outside diameter: 45-1000mm.
- Wall thickness: 5-15 mm.
- Precision of Size: H9-H11
- Steel grade: ST-52. CK20C CK45, 25Mn,27SiMn
Roller burnishingfinish TubesDESCRIPTION.
skived and roller burnished tube. Insidetolerance H8.
RANGE.
- Inside diameter: 40-400 mm.
- Outside diameter: 45-1000mm.
- Wall thickness: 5-15 mm.
- Precision of Size: H9-H11
- Steel grade: ST-52. CK20C CK45, 25Mn,27SiMn
Stainless steeltubes Alloy tubes
Send Inquiry to This Supplier
You May Also Like
-
Original 4110003080004 GASKET FOR SDLG WHEEL LOADER EXCAVATORUS$ 4.36MOQ: 1 Unit -
Spare Part 4110000787007 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Rock Sieve Bucket 1350mm 1500mm for CAT330 CAT336 Excavators Heavy Reinforced Skeleton Bucket With TeethUS$ 1500 - 3500MOQ: 1 Piece
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
High-Performance GT2263KLNV Turbo Charger for Hino Engineering/commercial VehiclesUS$ 540 - 560MOQ: 1 Unit
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Original MTU Engine Spare Parts 5530900261 FLAPNegotiableMOQ: 1 Bag
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
