Saw Chain Breaker And Rivet Spinner of Garden Tool Parts

Saw Chain Breaker And Rivet Spinner Specifications

1.Be intended to break apart and reassemble chains for chain saws.
2.The essential tool for professionals and serious wood cutters who purchase reels of chain and need the ability to rivet it themselves .

Saw chain breaker Directions 

1.According to the model of saw chain, selected the corresponding base.
2.Put the clasp on the saw chain sprocket tooth hole axial load, fitted with a connector to disconnect the saw chain into the article.
3.Take in saw chain stopper inside the plastic wheel groove,the buckle to riveting pressure on the chain axis alignment by chain on one side of a hex rivet head.
4.Clockwise (plastic handle by hand to answer the clasp on the chain axis compression at the end of the hex rivet riveting pressure head.
5.Turn the black handle that turns head hex rivet riveting pressure chain shaft head,and clockwise slowly turn the plastic handle at the same time, to make the chain axis head reach what you want.
6.Reverse the plastic handle, loosen the saw chain,according to the 3,4,5 steps,Second chain riveting pressure axis.

Saw Chain Rivet Spinner Directions

1.Accordingto the model of saw chain breaker, selected the corresponding base.
2.To dismantle the location of the connector on the base inside the tank.
3.The prong of chain rivet remover would be focused on the chain axis of rivet which need to remove, hand-pull handles then push down to separate the chain axle and connecting sheet or incisive tooth.
4.In a similar manner to dismantle the second chain axle of the same accessories.