Generator Controller 704
Generator Controller 704
The 704 is an Auto Mains Failure ControlModule that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed.
When the module detects a fault condition it automatically shuts down the engine. The module also
includes two user configurable auxiliary inputs.
Main features
KEY FEATURES
• Automatic mains (utility) supply monitoring
• Automatic shutdown when fault conditions are detected
• Manual start
• Engine pre-heat
• Engine monitoring and protection features
• Protected Solid State (PSS) outputs
• Front panel mounting
• Front panel programming
• Tamper proof engine hours counter
• Remote start
• LED indicators
• Configurable timers
• Configurable outputs
• Single/three phase mains sensing
KEY BENEFITS
• Transfers between mains (utility) and generator power
• On-site module configuration to match user requirements
• Hours counter provides accurate information for monitoring maintenance and warranty periods
• Multiple engine parameters are monitored simultaneously
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the
need for internal batteries.
MAXIMUM OPERATING CURRENT
50mA
TYPICAL CURRENT
12mA
CHARGE FAIL
8 Volt Charge Fail at 12 Volts
16 Volt Charge Fail at 24 Volts
INPUTS
ALTERNATOR INPUT RANGE
75V(L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUT FREQUENCY
50Hz – 60Hz at rated engine speed
(minimum:75V AC L-N) (Crank Disconnect from
15V L-N @ 20Hz) Overspeed +14% (+24%
overshoot) Underspeed -20%
OUTPUTS
START & FUEL OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active
AUXILIARY OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active
DIMENSIONS
OVERALL
165 mm x 125 mm x 29 mm
6.5” x 4.9” x 1.2”
CUT-OUT
149 mm X 109 mm
5.9” x 4.3”
OEM is available.
Why choose us------?
In line with the quality=life and belief in people-oriented,
continuous improvement management. Coupled with honesty, pragmatism.
Innovation and spirit of the pursuit of the perfect blog for the word each generator to Create an intelligent heart.
Here are the advantages of our company:


Send Inquiry to This Supplier
You May Also Like
-
Fuel Engine Manual Start Rewind Starter Disc for Cable Drive Equipment – Compatible With Cable Feeders, Pulling & Laying MachinesUS$ 20 - 50MOQ: 1 Combo
-
MOCAP in Stock Outside Pull Tapered Protective Plastic Plugs and CapsUS$ 0.02 - 0.03MOQ: 3000 Pieces
-
C27 Generator Industrial Diesel Engine Exhaust Muffler 295-8200 CA2958200 2958200NegotiableMOQ: 1
-
4902904 Actuator for Cummin s Diesel EngineNegotiableMOQ: 1
-
Truck Fuel Spin-on 20976003US$ 2.9 - 11.9MOQ: 200 Pieces
-
Black Coated Dynamo Bracket for Sale Custom Made for Mid East CountriesUS$ 75 - 110MOQ: 100 Sets
-
Leaf Spring for Steam Seal Ring of GeneratorUS$ 8.9 - 9.2MOQ: 50 Pieces
-
United Power Generator PartsUS$ 3 - 6MOQ: 1000 Pieces
-
Best Price Stable Enamel Ozone Generator Spare PartsUS$ 200 - 700MOQ: 1 Piece
-
Casting Stainless Steel Turbine BladeUS$ 0.2 - 5MOQ: 1000 Pieces