Agricultural Rubber Track 550*90*56
A.EXW, FOB, CIF and other normal international trade rule are accepted !
B.D/P, L/C, T/T and other normal type of payment, IF the order total account low than $1,000.00,
we can accept payment by Paypal, Western Union, Moneygram and other quick payment.
C.ON LINE FOR 24 HOURS SERVICES


D.ALL GOODS FROM OUR FACTORY WILL BE GURANTEED
WE ARE PROFESSIONAL RUBBER TRACKS SUPPLIERS.WE HAVE COMPLETE SPECIFICATION,ADVANCED PROCESS,RELIABLE QUALITY AND CAN BE WIDELY USED FOR AGRICULTURAL MACHINERY,CONSTRUCTIONS MACHINERYAND SNOWMOBLILE FOR CRAWLER,BULLDOZER,EACAVATOR,PAVER...ETC,KUBOTA,MUBOTA,LUCKYSTAR AND BOBOCAT,KOMATSU,JCB,YANMER.ETC. CAN BE MATCH TO OUR TRACKS
WELCOME TO INQUIRY!!!
Agricultural rubber track 550*90*56
1.SPECIFICATION:
2.FEATURES:
(1). Less round damage
Rubber tracks cause less damage to roads than steel tracks, and less rutting of soft ground than either steel tracks of wheel products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration, extending the machine’s lifetime and lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ cmm , a major reason for its use on the wet and soft terrain .
(6). Superior traction
The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the sane weight.
3.ATTENTION:
1- Check the tension after the track belt installed, it will be failure if too tight or loose. Generally, the sag distance of the center roller is 10 to 15cm to belt when lift the machine.
2- Avoid quickly starting or turning the machine on the scraggly ground.
3- Keep the rubber away from oil and grease, wipe off immediately while it is oil stained.
4- To avoid collision between the rubber track and other components of the machine, especially its inner edge.
5- Don’t using badly worn driving wheel, because it may damage the iron teeth of the rubber track.
6- If the machine is unused for a long time, the rubber track should be removed and cleaned, and kept well indoors to avoid sunlight and wetness.
7- Due to the track belt was made by rubber, the perfect working tempature is between -25 to 55 degree. However, it can meet the needs out of the range if made by special rubber and material.
4.Production procedule:
PACKING: NUDE,WOODERN PALLET,IRON PALLET
OUR CERTIFICATIONS:

Send Inquiry to This Supplier
You May Also Like
-
Supply Excavator Engine Stop Motor 0646445-ENegotiableMOQ: 1 Bag
-
Hydraulic Axial Piston Variable Pump AA11VO A11V A11VO A11VLO Series A11VO145DRS/11L-NZD12K02NegotiableMOQ: 1 Piece
-
CAT355 HD Special Excavator Bucket 4.5CBM Reinforced Construction BucketUS$ 1000 - 2000MOQ: 1 Piece
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
W010251010 Diesel Fuel Filter Element 13022658 Filter Assembly | SEM 636B Construction Machinery PartsUS$ 20 - 22MOQ: 1 Unit
-
Excavator Hydraulic Pump With SAE J744 Standard Compliant for Global CompatibilityNegotiableMOQ: 500 Pieces
-
For Volvo Penta Fuel Filter 20998367 (7420514654 – 20998367)NegotiableMOQ: 1 Piece
-
Original 390kw Weichai Wp13 Diesel Engine WP13G530E310 for Sany Mining Card SK80/SK90US$ 77815.12 - 80532.20MOQ: 1 Piece
-
High Quality Engine Parts Fuel Injector Sleeve 97602-301 97606661 61234130 18143760 675442 Suitable For CUMMINSUS$ 20 - 50MOQ: 12 Pieces
-
Diamond High Speed Steel SDS Hammer Drill Bit Set Metric Sizes for Masonry and Marble ApplicationsNegotiableMOQ: 100 Pieces








