Used Oil Burner/multi-fuel Burner/waste Oil Burner(HT-100)
multi-fuel burner
may consume all kinds of abandoned fuel,such as waste engine oil,waste diesel-oil,heavy diesel-oil,residual oil,waste cooking oil,waste hydraulic oil etc liquid oil.
1.Atomized particle small,diameter smaller than 40 micron,distribute equally.
2.Patent nozzle technology ,no block,carbonization.
3.Flash point of fuel have no limit for circumstance temperature(high altitude and cold area )
4.Operate simple,short and convenient.
5.Saving energy,environmental
6.Fuel not require any additive to treat
7.Environmemt protection
8.Without abrasion part,long usage life.
9.Perfect electricity protection,safe and reliable.
10.Works in closed internal combustion, with flame extinguished protection.
|
multi-fuel burner HT-100 Specification | |
| Oil Consumption | 5-7kg/h |
| Output Heat | 50-65kw |
| Output Heat | 43,000-55,900KCal |
| Output Heat | 170,600-221,780BTU/h |
| Power Consumption | 0.09KW |
| Nozzle | 1×2.0mm |
| Tube Diameter | 110mm |
Flange Diameter |
172m |
| Power Supply | 220/50Hz |
| Air Pressure | 1.0-1.2bar |
| Net Weight | 27 |
multi-fuel burner scope
used for treat exhaust gas,flotsam hot water burner,warm wind burner,smelt burner and all kinds of heat device.
FAQ
Is it burning of waste oil dangerous and do it pollute the air?
Absolutely not! Waste oil burners we sell burn waste oil as clean as a light oil burner or better.Our burners are designed to burn: Vegetable oils, used crankcase oils, transmission & hydraulic oils,Extra light fuel oil, light and medium heavy fuel oil, other combustible liquids .The patented technology allows the burning of waste oils regardless of viscosity or flash point. The preheater heats the oil to a temperature where all oils reach the same viscosity. The oil is sprayed by compressed air at
a relatively low pressure. This allows the use of larger nozzles which do not get blocked even if soiled or semi fluid oils are used.
All components are modular in design such that they can be changed out easily if there is a failure.
Safety
Thermostatic and mechanical components reliably protect the burner against overheating and spillage.
Send Inquiry to This Supplier
You May Also Like
-
High Productivity Automatic Metal Baling Machine Process Stainless Steel Copper Aluminum Alloy Waste MetalUS$ 5950 - 6000MOQ: 1 Set
-
Aluminum Cans Hammer Mill for Metal Recycling Scrap Metal Hammer MillUS$ 21500 - 99900MOQ: 1 Set
-
Non-ferrous Metal Eddy Current Separator: Waste Incineration Slag SortingUS$ 9880MOQ: 1 Combo
-
Metal Recycling MachineNegotiableMOQ: 2000 Sets
-
Computers Scrap for Sale in Bulk Untested Scrap Recycle Computer Hardware Desktop Power BoxNegotiableMOQ: 10000 Pieces
-
Waste Tyre Shredder With Cheap Price And High QualityUS$ 1,800 - 5,800MOQ: 1 Set
-
Economic Air Conditioning Radiator Recycling MachineUS$ 5,000 - 5,700MOQ: 1 Set
-
New Design Air Container Aluminum Copper Separator for Metal RecyclingUS$ 1 - 7,650MOQ: 1 Set
-
300-500 Kgs/hr High Quality Cost Effective Waste Cpu Recycling Machine Direct Factory SaleNegotiableMOQ: 1 Set
-
Scrap Wire Chipper Shredder For SaleUS$ 9,000 - 42,000MOQ: 1 Set



